Panasonic PT-MZ670, Руководство по эксплуатации

Страница: 180 / 228

Chapter 5 Operations — Projecting with Panasonic APPLICATION input
180 - ENGLISH
Using the moderator mode in the Panasonic APPLICATION input
When using the projector in the moderator mode, the moderator can specify the image to allow to display by
operating the projector when multiple devices are connected to the projector.
1) Set the [NETWORK/USB] menu → [Panasonic APPLICATION] → [MODERATOR MODE] to [ON].
2) Press the <NETWORK/USB> button to switch the input to Panasonic APPLICATION.
f
Every time the <NETWORK/USB> button is pressed, the input will switch in the order of MEMORY
VIEWER, Panasonic APPLICATION, and MIRRORING. Press the <NETWORK/USB> button until the input
switches to Panasonic APPLICATION.
f
The screen to display in thumbnail view is displayed once the input is switched to Panasonic
APPLICATION.
3) Connect the device with the image transfer application software started to the projector.
f
The image sent to the projector by the operation on the device is displayed in thumbnail view.
f
Images from maximum of 16 devices can be displayed in the screen in thumbnail view.
4) Press
asqw
to select the device to display the image in full screen, and press the <ENTER> button.
f
Select the image to display in full screen from the images displayed in thumbnail.
f
After a while, the selected image is displayed in full screen.
Note
f
For details of the connection method to the projector and operation method using the application software, refer to the Operating Instruction
of each application software.
f
For details on moderator mode setting, refer to the [NETWORK/USB] menu → [Panasonic APPLICATION] (
x
page 147).
f
Press the <ENTER> button while displaying the image in full screen to return to the screen in thumbnail view. Select different image by
pressing
asqw
to switch the image to display.
f
When the <AUTO SETUP/CANCEL> button on the remote control or the <LENS/CANCEL> button on the control panel is pressed while
displaying the image from the device, the information such as the network ID, the projector name, or the QR code is displayed on the
screen. For details of these information, refer to “Description of the standby screen” (
x
page 179).
f
When “Wireless Manager ME6.4” or “Wireless Projector” is used, selection of the image to display in full screen can be operated from the
web browser. For details, refer to the Operation Instructions of each application software.
f
When the [NETWORK/USB] menu → [WIRELESS LAN] is set to [SIMPLE] or [M-DIRECT], the number of devices that can connect to the
projector via wireless LAN is restricted to 10 devices.