Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 121
[VW431D]
VW431D series
6) Press the <ENTER> button.
f
The confirmation screen is displayed.
7) Press
qw
to select [OK], and press the <ENTER> button.
[REMOTE1 MODE]
Set the <REMOTE 1 IN> terminal.
1) Press
as
to select [REMOTE1 MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT]
Uses pin assignment of the <REMOTE 1 IN> terminal in standard setting.
[USER]
Use this item when changing the setting of the <REMOTE 1 IN> terminal. (
x
page 216)
[F/W SERIES]
Uses the <REMOTE 1 IN> terminal setting compatible with the F/W series.
f
Proceed to Step
3)
when [USER] is selected.
3) Press the <ENTER> button.
4) Press
as
to select one from [PIN2] to [PIN8], and press
qw
to switch the setting.
[FUNCTION BUTTON]
Set the function of the <FUNCTION> button on the remote control.
1) Press
as
to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f
The
[FUNCTION BUTTON]
screen is displayed.
3) Press
as
to select a function.
[DISABLE]
Disables the <FUNCTION> button.
[SUB MEMORY]
Displays the sub memory list. (
x
page 134)
[SYSTEM SELECTOR]
Switches the [SYSTEM SELECTOR] setting. (
x
page 88)
[DAYLIGHT VIEW]
Switches the [DAYLIGHT VIEW] setting. (
x
page 87)
4) Press the <ENTER> button.
[LENS CALIBRATION]
Detect the lens shift limit value of the projector, and automatically set the home position.
1) Press
as
to select [LENS CALIBRATION].
2) Press the <ENTER> button.
f
The confirmation screen is displayed.
3) Press
qw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
f
The lens moves up, down, left, and right to detect the lens shift limit value, and automatically set the home
position.
f
The lens stops to complete the lens calibration.
Note
f
[PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during calibration.
f
[INCOMPLETE] is displayed when the lens calibration was not executed correctly.
f
Pressing the <FOCUS> button on the remote control for three seconds or longer will also display the confirmation screen for lens calibration
execution.
Содержание PT-MZ670
Страница 56: ...56 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with...
Страница 152: ...152 ENGLISH Chapter 5 Operations This chapter describes how to use each function...
Страница 208: ...208 ENGLISH Chapter 7 Appendix This chapter describes specifications and after sales service for the projector...