Panasonic PT-MZ670, Руководство по эксплуатации

Страница: 100 / 228

Chapter 4 Settings — [DISPLAY OPTION] menu
100 - ENGLISH
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed.
Set as necessary for the screen in use.
1) Press
as
to select [SCREEN SETTING].
2) Press the <ENTER> button.
f
The [SCREEN SETTING] screen is displayed.
3) Press
qw
to switch the [SCREEN FORMAT] item.
f
The items will switch each time you press the button.
Model No. [SCREEN FORMAT] Range when [SCREEN POSITION] is selected
PT-MZ670
PT-MZ570
[16:10] Cannot be adjusted.
[4:3]
Adjusts the horizontal position between - 160 and 160.
[16:9] Adjusts the vertical position between - 60 and 60.
PT-MW630
PT-MW530
[16:10] Cannot be adjusted.
[4:3] Adjusts the horizontal position between - 107 and 107.
[16:9] Adjusts the vertical position between - 40 and 40.
4) Press
as
to select [SCREEN POSITION].
f
[SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].
5) Press
qw
to adjust [SCREEN POSITION].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP/
CANCEL> button on the remote control on each occasion if you input unregistered signals frequently at meetings,
etc.
1) Press
as
to select [AUTO SIGNAL].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Sets the auto signal function to off.
[ON]
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
[AUTO SETUP]
Set this function when adjusting a special signal for still image signal, or horizontally long (such as 16:9) signal.
Setting with [MODE]
1) Press
as
to select [AUTO SETUP].
2) Press the <ENTER> button.
f
The [AUTO SETUP] screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT]
Standard setting.
[WIDE]
Select this item when an image aspect ratio is a wide-screen signal, which does not meet the
[DEFAULT] setting.
[USER] Select this when receiving a signal with a special horizontal resolution (number of display dots).
f
Proceed to Step 7) when [DEFAULT] or [WIDE] is selected.