Panasonic PT-MZ670, Руководство по эксплуатации

Страница: 109 / 228

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 109
Item Adjustment
[FADE-IN]
[FADE-OUT]
[OFF] Does not set fade-in or fade-out.
[0.5s] - [10.0s]
Sets the fade-in or fade-out time.
Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s]. [0.5s] -
[4.0s] can be selected in increments of 0.5.
Note
f
If the <SHUTTER> button on the remote control is pressed during fade-in or fade-out, the fade operation is canceled.
f
Fade-in/fade-out is not performed on the audio. Audio is output or paused linked to the operation of the shutter function.
Setting [STARTUP]
Automatically enable/disable the shutter function (shutter: closed/open) when the power is turned on.
1) Press
as
to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The [SHUTTER SETTING] screen is displayed.
3) Press
as
to select [STARTUP].
4) Press
qw
to switch the item.
[OPEN]
The projector goes into projection mode with the shutter function disabled (shutter: opened) when the
power is turned on.
[CLOSE]
The projector goes into projection mode with the shutter function enabled (shutter: closed) when the
power is turned on.
Using the shutter function
Image and audio is turned off when the projector is not used for a specific time.
1) Press
as
to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The [SHUTTER SETTING] screen is displayed.
3) Press
as
to select [SHUTTER].
4) Press the <ENTER> button.
f
Press the <MENU> button or the <RETURN> button to clear.
Note
f
The power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the shutter function is in use (shutter: closed).
f
To output audio while the shutter function is in use (shutter: closed), set the [PROJECTOR SETUP] menu → [AUDIO SETTING] → [IN
SHUTTER] to [ON].
[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[COUNT UP] Displays the elapsed time from when the count is started.
[COUNT DOWN] Displays the remaining time against the time set in [TIMER].