Chapter 3
Basic Operations — Switching on/off the projector
64 - ENGLISH
Making adjustments and selections
It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.
1) 8)
5)
6)
3)
3)
7) 9)
2)
1) 5) 7) 8) 9)
2)
4)
1) Press the <FOCUS> button to roughly adjust the focus of the projected image. (
x
page 67)
2) Change the setting of the [PROJECTOR SETUP] menu
→
[PROJECTION METHOD] depending on the
installation mode. (
x
page 35)
f
Refer to “Navigating through the menu” (
x
page 79) for the operation of the menu screen.
3) Select the input by pressing the input selection button on the remote control or the control panel.
f
The buttons that can be used on the remote control or the control panel are as follows.
Remote control:
<HDMI 1> button, <HDMI 2> button, <DIGITAL LINK> button, <RGB1/2> button, <VIDEO> button,
<NETWORK/USB> button
Control panel:
<INPUT SELECT> button
f
For details of operation for input selection, refer to “Selecting the input signal” (
x
page 66).
4)
Adjust the front, back and sideway tilt of the projector with the adjustable feet. (
x
page 47)
5) Press the <SHIFT> button to adjust the position of the projected image. (
x
page 67)
6)
If the input signal is the analog RGB signal, press the <AUTO SETUP/CANCEL> button to
automatically adjust the projection position.
7) Press the <ZOOM> button to adjust the projected image size to match the screen.
8) Press the <FOCUS> button again to adjust the focus. (
x
page 67)
9) Press the <ZOOM> button again to adjust the zoom to match the projected image size to the screen.
Note
f
When the projector is switched on for the first time after purchase, or when the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[ALL USER
DATA] is executed, the focus adjustment screen is displayed immediately after the projection is started, and then the
[INITIAL SETTING]
screen is displayed. For details, refer to “When the initial setting screen is displayed” (
x
page 60).
Содержание PT-MZ670
Страница 56: ...56 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with...
Страница 152: ...152 ENGLISH Chapter 5 Operations This chapter describes how to use each function...
Страница 208: ...208 ENGLISH Chapter 7 Appendix This chapter describes specifications and after sales service for the projector...