Panasonic PT-JW130F, Руководство по эксплуатации

Страница: 4 / 217

4 - ENGLISH
Read this first!
WARNING:
r
POWER
The circuit breaker shall be installed near the equipment and shall be easily accessible when problems
occur. If the following problems occur, cut off the power supply immediately.
Continued use of the projector in these conditions will result in fire, electric shock, or exposure to dangerous
laser radiation.
f
If foreign objects or water get inside the projector, cut off the power supply.
f
If you notice smoke, strange smells or noise coming from the projector, cut off the power supply.
Please contact your dealer for repairs, and do not attempt to repair the projector yourself.
When mounting/removing the projector to/from the track system, or performing maintenance, be sure
to cut off the power supply.
Electric shocks can result.
Completely insert the power connector of the adapter into the projector terminal.
If the power connector is not inserted correctly, electric shocks or overheating will result.
f
Do not use the power connector which is damaged.
Do not use anything other than the provided adapter.
Failure to observe this will result in electric shocks or fire.
Do not handle the track system with wet hands.
Failure to observe this will result in electric shocks.
During a thunderstorm, do not touch the projector or the track system.
Electric shocks can result.
Do not overload the track system.
If the power supply is overloaded (ex., by mounting too many devices), overheating may occur and fire will
result.
r
ON USE/INSTALLATION
Ensure that track system is installed per manufacturer’s instructions.
Inadequate installation may result in fire, electric shocks, or falling of the projector.
Mount the projector to the track system which is installed in the horizontal ceiling or beam, and can
withstand the load.
Mounting the projector to the following track system will result in fire, electric shocks, or falling of the projector.
f
Track system that is installed in the wall surface or floor
f
Track system that is installed in the sloping ceiling or beam
f
Track system that cannot withstand the load
Make sure that your footing is safe and secure during installation.
If your footing is not secure, you may tip over or fall down, and an injury may result.
When mounting the projector to the track system, completely turn the lever of the track mount part to
the mounting direction.
Inadequate mounting to the track system will result in falling accident.
When removing the projector from the track system, hold the projector with your hand.
Releasing the lever of the track mount part without holding the projector will result in damage or deformation of
the projector by falling, or serious accident or injury.
When removing the projector from the track system, first release the lever of the track mount part on
the indicators.
Releasing the lever on the main unit first will result in the damage to the components and will cause falling
accident.
Do not use the projector whose outer case or track mount part is damaged due to falling or other
reasons.
Continued use of the projector in such a condition will result in fire, electric shock, or exposure to dangerous
laser radiation.
Please contact your dealer for repairs, and do not attempt to repair the projector yourself.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam.
Using the projector under such conditions will result in fire, electric shocks or deterioration of components.
Deterioration of components may cause the projector to fall down.