Panasonic PT-JW130F, Руководство по эксплуатации

Страница: 44 / 217

Chapter 3 Basic Operations — Turning on/off the projector
44 - ENGLISH
Turning on/off the projector
Power indicator
Indicates the status of the power. Check the status of the power indicator <ON (G)/STANDBY (R)> before operating the projector.
When the light source indicator <LIGHT> and the temperature indicator <TEMP> are lighting or blinking, a problem may have occurred inside
the projector. Check the status of the indicator before turning on the projector, and take appropriate steps. (
x
page 199)
ON ( G ) /
STANDBY ( R )
LIGHT
TEMP
SD
Power indicator <ON (G)/STANDBY (R)>
Light source indicator <LIGHT>
Temperature indicator <TEMP>
Indicator status Projector status
Off The power of the track system is turned off.
Red
Lighting
The power is switched off. (standby mode)
[STANDBY MODE] in the [SETUP] menu → [ECO MANAGEMENT] is set to [ECO].
Projection will start when the power <
v
/
b
> button is pressed.
f
The projector may not operate when the temperature indicator <TEMP> is blinking.
(
x
page 199)
Blinking
*1
The power is switched off (in standby mode).
[STANDBY MODE] in the [SETUP] menu → [ECO MANAGEMENT] is set to
[NETWORK].
Projection will start when the power <
v
/
b
> button is pressed.
f
The projector may not operate when the temperature indicator <TEMP> is blinking.
(
x
page 199)
Blinking
*2
The power is switched off (in standby mode).
[STANDBY MODE] in the [SETUP] menu → [ECO MANAGEMENT] is set to [NORMAL].
Projection will start when the power <
v
/
b
> button is pressed.
f
The projector may not operate when the temperature indicator <TEMP> is blinking.
(
x
page 199)
Green Lighting Projecting.
*1 The indicator will blink in frequency of lighting 2.75 seconds → off 0.25 seconds → lighting 0.75 seconds → off 0.25 seconds.
*2 The indicator will blink in frequency of lighting 2.75 seconds → off 0.25 seconds.
Note
f
The projector consumes power even in standby mode (when the power indicator <ON (G)/STANDBY (R)> is lighting or blinking in red).
Refer to “Power consumption” (
x
page 212) for the power consumption.
f
The power indicator <ON (G)/STANDBY (R)> blinks in green if a remote control signal is received.
f
The power indicator <ON (G)/STANDBY (R)> blinks slowly in green while the AV mute is in use.
f
When the computer (including iPad/iPhone/iPod touch, Android terminals) performs a connection check on the projector using the
Panasonic image transfer application software, the power indicator <ON (G)/STANDBY (R)> blinks in orange.