Panasonic PT-JW130F, Руководство по эксплуатации

Страница: 72 / 217

Chapter 4 Settings — [SETUP] menu
72 - ENGLISH
[NORMAL] Select this item when high luminance is required.
[ECO] Select this item when high luminance is not required.
Note
f
When [ECO] is set, the power consumption can be saved and operation sound can be reduced compared to when [NORMAL] is set.
f
When [ECO] is set, the images may appear different from that when [NORMAL] is set.
Setting [NO SIGNAL SHUT-OFF]
(Only in the projector mode)
This function automatically switches the power of the projector to standby if the input is HDMI and there is no input signal for a certain period
of time. The time before switching to standby can be set.
1) Press
as
to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f
The [ECO MANAGEMENT] screen is displayed.
3) Press
as
to select [NO SIGNAL SHUT-OFF].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DISABLE] Disables [NO SIGNAL SHUT-OFF].
[10MIN.] - [90MIN.] Sets the time in 10-minute intervals.
Note
f
If the input is set to other than HDMI, [NO SIGNAL SHUT-OFF] is disabled.
Setting [STANDBY MODE]
Set the power consumption during standby.
1) Press
as
to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f
The [ECO MANAGEMENT] screen is displayed.
3) Press
as
to select [STANDBY MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ECO] Select this item to reduce power consumption during standby.
[NETWORK]
Select this item to reduce power consumption during standby, and to operate the projector via wired
LAN using the Wake on LAN function.
[NORMAL]
Select this item to use the network function during standby.
Or, select this item to synchronize with the NTP server and adjust the date and time of the projector
automatically.
Note
f
When [ECO] is set, network functions are not available during standby.
f
When [ECO] is set, there may be a delay in displaying when the power is turned on, compared to when [NORMAL] is set.
f
When [NETWORK] is set, the Wake on LAN function enables the network function available for 60 seconds even during standby.
f
When [NORMAL] is set, the internal cooling fan may run during standby.
f
The [STANDBY MODE] setting is not reset to the factory default even when [ALL USER DATA] is executed from the [SETUP] menu →
[INITIALIZE] (
x
page 76).
f
If the following three settings are made, the image will disappear temporarily when synchronizing with the NTP server once after you have
turned on the power or the power has been turned on.
g
Setting [STANDBY MODE] to [ECO] or [NETWORK]
g
Setting the [SETUP] menu → [DATE AND TIME] → [ADJUST CLOCK] → [NTP SYNCHRONIZATION] to [ON]
Refer to “Setting the date and time automatically” (
x
page 75) for details.
g
Setting the input to signage
[INITIAL STARTUP]
Set the startup method when the power of the track system is turned on.