Panasonic PT-JW130F, Руководство по эксплуатации

Страница: 180 / 217

Chapter 5 Operations — Content Manager
180 - ENGLISH
6) Click the [Upload] button.
f
The upload target schedule is registered in the SD card.
Note
f
When the upload destination SD card contains the same day of the week schedule, or the same date schedule, the schedule is overwritten
with the uploaded schedule.
f
Backup files are saved in tar format.
f
If the size of the original backup data is large, several backup files may have been created to save the data. Make sure to add all the
relevant files before upload.
f
Upload of schedules is supported only in Windows computers or Mac.
f
The timetable ID registered when a schedule has been uploaded may vary depending on the schedule registration situation of the upload
destination.
Changing login information
Set the user name and password for logging in to the Content Manager for administrator rights/user rights respectively.
r
[Login] page
1
2
3
4
5
1
2
3
4
5
6
7
7
6
1 [Current] - [User name]
Enter the current user name. (Up to 8 alphanumeric characters
in single byte)
2 [Current] - [Password]
Enter the current password. (Up to 16 alphanumeric characters
in single byte)
3 [New] - [User name]
Enter the desired new user name. (Up to 8 alphanumeric
characters in single byte)
4 [New] - [Password]
Enter the desired new password. (Up to 16 alphanumeric
characters in single byte)
5 [New] - [Password(Retype)]
Enter the desired new password again.
6 [Undo] button
Click this to clear the entered information.
7 [Setting] button
Click this to confirm the settings.
r
Procedure
1) Click the [Login] tab.
f
The [Login] page is displayed.
2) Enter the current user name and password.
3) Enter the desired new user name and password.
4) Enter the desired new password again.
5) Click the [Setting] button.
f
Set contents are registered in the projector.
Playing back the schedule simultaneously in multiple projectors
By synchronizing the date and time of the projector with the NTP server, you can meet the playback timing of the schedule among multiple
projectors. Use this function when you set up multiple projectors of this model in the same floor or other close location and play back the same
schedule.
Please note that even when the date and time are adjusted, a time lag of maximum one second may occur in the schedule or the starting or
ending timing of playback for each content registered in the schedule. Music content does not support simultaneous playback.
1) Set [STANDBY MODE] to [NORMAL].
f
For details on the [STANDBY MODE] setting, refer to “Setting [STANDBY MODE]” (
x
page 72).