Panasonic Palmcorder MultiCam PV-VM202, Руководство по эксплуатации

Страница: 35 / 160

35
1
3
4
2
A
ACCESS
CARD EJECT
6
5
1
F 7
640
1
TAPE
CARD
5
PHOTO
SHOT
3, 4
3
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
1 2
STILL MPEG4 VOICE
CARD
MODE
2
BACKLIGHT
CAMERA
STILL
Using a Memory Card
A Card can be used to record files or play back files.
≥
Use genuine SD Memory Card or MultiMediaCard only.
ª
Inserting a Memory Card
Before inserting a Memory Card, be sure to turn off the Palmcorder.
1
While holding the Memory Card with its cut off corner
A
facing right
1
, insert it into the Card Slot
2
.
≥
The display of the Card Slot changes from
3
to
4
.
Ejecting a Card
After turning the Palmcorder off, slide the [CARD EJECT] Lever
5
to the left.
ª
[ACCESS] Lamp
While the Palmcorder is accessing the Card (reading, recording, playback,
erasing, moving of images), the [ACCESS] Lamp
6
lights up.
≥
While the [ACCESS] Lamp is on, never attempt to: pull out the Card, turn
off the Palmcorder power, or switch the [TAPE/CARD] Selector. Such
actions will damage the Card and cause the Palmcorder to malfunction.
~~~~~~~~~~~~~~~~~~~~~~~~~
Recording on the Memory Card
Three kinds of data can be recorded by selecting with the
[STILL/MPEG4/VOICE] Selector. When recording still pictures, select [STILL]
(Card PhotoShot), when recording moving pictures, select [MPEG4]
(MPEG4 Recording), when recording voice, select [VOICE]
(Voice Recorder Function).
≥
If the [TAPE/CARD] Selector is set to [CARD], the Palmcorder is
automatically turned off when you leave it for about 5 minutes without
performing any PhotoShot recording.
≥
When the [TAPE/CARD] Selector is set to [CARD], you cannot record to the
Tape.
ª
Card PhotoShot
Still pictures can be recorded on the Memory Card from the Palmcorder lens
as well as from scenes that have already been recorded on a cassette.
The size of images that are recorded using this Palmcorder is approximately
1,080,000 pixels. Recording of images with a size that is larger than a million
pixels is called mega-pixel still-picture recording. Compared to images of
normal recording, images that are created by mega-pixel still-picture
recording can be printed more clearly.
Recording from the Palmcorder Lens (Camera Mode)
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [STILL].
3
Set [CAMERA FUNCTIONS] >> [CARD SETUP] >>
[PICTURE SIZE] >> [1200
k k k k
900] or [640
k k k k
480].
4
Set the [PICTURE QUALITY] to desired picture quality.
5
Press the [PHOTO SHOT] Button.
≥
The [ ] Indication will light in red.
≥
Mega-pixel recording (when you select [1200
t
900] in step 3) is useful for
taking clear pictures, but the following functions are disabled during mega-
pixel recording.
≥
Digital zooming (
l
22)
≥
Digital Electronic Image stabilizer function (
l
22)
≥
Digital Effect functions (
l
26, 27)
≥
Title In/Creation (
l
42)
≥
The power is automatically turned off after about 5 minutes when a card has
been inserted.
PICTURE
220P.book 35 ページ ２００２年３月２０日 水曜日 午前１１時６分