Panasonic Palmcorder MultiCam PV-VM202, Руководство по эксплуатации

Страница: 19 / 160

19
CLOCK SET
PUSH MENU TO RETURN
YEAR :2002
MONTH :DEC
DAY :21
HOUR :12AM
MINUTE:15
1
1, 3
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
1 2
1, 2
CAMERA FUNCTIONS
PUSH MENU TO EXIT
1.CAMERA SETUP
2.DIGITAL EFFECT
3.CARD SETUP
4.MULTI-PICTURES
5.RECORDING SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS
1
2
AUDIO-REC
REC-SPEED
AUDIO-REC 12bit
RETURN ---- YES
SP LP
INDEX 2HOUR
WIND-CUT OFF
RECORDING SETUP
PUSH MENU TO EXIT
FLASH
ON
RED EYE REDUCTION ON OFF
REC-SPEED
12bit
RETURN ---- YES
SP
INDEX 2HOUR
WIND-CUT OFF
RECORDING SETUP
PUSH MENU TO EXIT
FLASH
ON
RED EYE REDUCTION ON OFF
16bit
Setting Date and Time
1
Press the [MENU] Button and rotate the [PUSH] Dial to select
[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].
2
Rotate and press the [PUSH] Dial to select
[YEAR]/[MONTH]/[DAY]/[HOUR]/[MINUTE] and set it to a
desired value.
≥
Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button to finish setting the date and time.
≥
The clock operation starts from [00] second.
≥
The menu will disappear when the [MENU] button is pressed again.
≥
It is possible that the built-in clock in the Palmcorder may become
inaccurate. Please check the time before recording. If the [
0
] Indication
1
is flashing, charge the built-in lithium battery and reset the date and
time.
~~~~~~~~~~~~~~~~~~~~~~~~~
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the clock. When the [
0
]
Indication
1
is lit, the internal lithium battery is near discharge.
1
Connect the AC Adaptor to the Palmcorder with the power
turned off and then connect to the AC Jack.
≥
After charging for 4 hours, the built-in lithium battery can power the
clock for approximately 3 months.
~~~~~~~~~~~~~~~~~~~~~~~~~
LP Mode
A desired recording speed can be selected with [REC-SPEED] on the
[RECORDING SETUP] Sub-Menu.
1
If LP Mode is selected, the recording time becomes 1.5 times longer
than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-like noise patterns may appear on a playback image, or some normal
functions may be restricted.
≥
The contents that are recorded in LP Mode are not completely compatible
with other equipment.
≥
Audio Dubbing is not possible with LP Mode. (
l
33)
~~~~~~~~~~~~~~~~~~~~~~~~~
Audio Recording Mode
The sound quality of the recorded sound can be selected with [AUDIO-REC]
on the [RECORDING SETUP] Sub-Menu.
2
High sound-quality recording is possible with “16bit 48kHz 2 track” Mode.
With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for re-recording.
1
1
220P.book 19 ページ ２００２年３月２０日 水曜日 午前１１時６分