No. SX-DSV03015 - 62 -
Motor Business Unit, Panasonic Corporation
12. Others
Precautions for export of this product and the equipment incorporating this product
If the end user or end purpose of this product relates to military affairs, armament and so on, this product may
be subject to the export regulations prescribed in "Foreign Exchange and Foreign Trade Control Law".To
export this product, take thorough examination, and follow the required export procedure.
We cannot warrant this product, if it is used beyond the specified operating conditions.
Compliance with the relevant standards should be considered by the user.
The final decision on the compatibility with the installations and components at the user's site, in terms of
structure, dimensions, characteristics and other conditions, should be made by the user.
When using this product in your equipment, be careful about the compatibility with the servomotor and the
servo driver to be used together.
For performance improvement or other reasons, some components of this product may be modified in a range
that satisfies the specifications given in this document.
Any specification change shall be based on our authorized specifications or the documents presented by the
user. If a specification change may affect the functions and characteristics of this product, we will produce a
trial product, and conduct examination in advance.Note that the produce price may be changed with a change
in its specifications.
We have made the best efforts to ensure the product quality. However, complete equipment at customer’s site
may malfunction due to a failure of this product. Therefore, take precautions by providing fail-safe design at
customer’s site, and ensure safety within the operating range of the work place.
Failure of this product depending on its content, may generate smoke of about one cigarette.
Take this into consideration when the application of the machine is clean room related.
When the equipment runs without connecting the servomotor's shaft electrically to ground, electrolytic
corrosion may occur on the motor bearing and the bearing noise may get louder depending on the equipment
and installing environment. So, customer is responsible to check and verify it.
A customer must verify and inspect the equipment. Please be careful when using in an environment with high
concentrations of sulphur or sulphuric gases, as sulpharation can lead to disconnection from the chip resistor
or a poor contact connection.
Do not use benzene, thinner, alcohol, and acid or alkaline detergent, because they can discolor and damage the
packaging chassis.
Apply adequate tightening torque to the product mounting screw by taking into consideration strength of the
screw and the characteristics of material to which the product is installed. Over-tightening can damage the
screw and/or material; under-tightening can result in loosening.Example) Steel screw(M5) into steel
section:2.7-3.3Nm.
Take care to avoid inputting a supply voltage which significantly exceeds the rated range to the power supply
of this product. Failure to heed this caution may result in damage to the internal parts, causing smoking and/or
a fire and other trouble.
When discard batteries, provide insulation using a tape, etc. and discard the batteries abiding by a municipal
law.
When discarding the equipment, process the item as an industrial waste.
