Basic Telephone Operations
With this unit, there are several ways to make and answer calls.
Going Off-hook
In this manual, when you see the phrase "go off-hook", you can do any of the following:
•
Lift the handset off of its cradle.
•
Press
.
•
On the Phone screen, press a flexible button assigned as a DN (Directly Number) button.
Note
•
If
[Answer]
is displayed on the screen, tapping
[Answer]
is the same as pressing
.
Going On-hook
In this manual, when you see the phrase "go on-hook", you can do any of the following:
•
Replace the handset on its cradle.
•
Press
, if you are in hands-free mode.
Note
•
If
[Disconnect]
is displayed on the screen, tapping
[Disconnect]
ends the current call, but you remain
off-hook (i.e., you will hear a dial tone).
Hands-free Mode
The following actions enable hands-free mode, where you can talk to and hear the other party without using
the handset.
•
In stand-by mode, press
, and then make a call.
•
During a call, press
, and then replace the handset on its cradle.
•
In stand-by mode on the Phone screen, press a flexible button assigned as a DN button.
Lifting the handset off its cradle cancels hands-free mode.
Off-hook Monitor
The following action allows other people to listen to the conversation through the speaker while you continue
the conversation using the handset.
•
During a call, press
.
Pressing
again cancels off-hook monitor.
Note
•
While off-hook monitor is enabled, replacing the handset on its cradle enables hands-free mode.
22
Operating Instructions
Document Version 2011-09
Before Operating the Telephone