Default
20
Value Range
1–48 digits
Feature Manual References
2.2.32 Message Waiting Notification—Device
Callback No. Entry Interdigit Time-out
Specifies the length of time the VPS will wait for the caller to press another dial key during Beeper Callback
No. Entry. If the caller does not enter any digits within the specified time, the VPS will accept the digits already
dialed by the caller as the Beeper Callback Number, then announce the dialed digits to the caller for
confirmation.
Default
5 s
Value Range
1 s–10 s
Feature Manual References
2.2.32 Message Waiting Notification—Device
System Callback No.
Specifies the telephone number that will be displayed on the subscriber’s beeper to indicate the telephone
number the subscriber should call back. The system callback number is displayed when "Beeper Callback No.
Entry Mode" is set to "Disable", or when the caller does not enter his or her telephone number when prompted
to by the VPS. In order to use this feature, the callback number entry code "X" must be added to the end of
the subscriber’s beeper number when stored in the VPS.
Note
•
If "Beeper Callback No. Entry Mode" is set to any value other than "Disable" (see "Beeper Callback
No. Entry Mode" in 2.1.4 Notification Parameters), the callback number entered by the caller will display
on the destination beeper. However, if the caller fails to enter a callback number, the System Callback
No. will display instead.
Default
None
Value Range
Max. 32 digits
Programming Manual References
2.1.4 Notification Parameters
Document Version 3.0 2010/06
Programming Manual
165
2.5.4 Parameters
