3.
Click
OK
.
•
If there are active ports, the System Administrator will be asked to either to continue or to cancel.
Select
OK
to continue, or
Cancel
to abort the operation.
4.
Click
OK
when the VPS has been initialized.
Restart System
1.
Select
Restart System
.
(You can click the icon in the toolbar instead of step 1 and 2.)
•
If there are active ports, the System Administrator will be asked to either to continue or to cancel.
Select
OK
to continue, or
Cancel
to abort the operation.
2.
Click
OK
when prompted to restart the VPS.
1.9.8 Utility—Diagnostic
–
Codec/DSP Voice Path: diagnoses whether the voice path between Codec and DSP functions properly.
–
Play/Record Voice Path: diagnoses whether the voice path in the playing/recording unit functions properly.
Follow the steps below for System Diagnostic:
1.
Click
Utility
in the menu bar.
2.
Select
Diagnostic
.
3.
Select
Codec/DSP Voice Path
or
Play/Record Voice Path
.
•
If there are active ports, the System Administrator will be asked to either to continue or to cancel. Select
OK
to continue, or
Cancel
to abort the operation.
•
Diagnosis starts.
4.
Click
OK
when the diagnostic is completed.
1.9.9 Utility—Programmer Code
The System Administrator can change the programmer code that is needed to use KX-TVA Maintenance
Console.
Follow the steps below to change the programmer code:
1.
Click
Utility
in the menu bar.
2.
Select
Programmer Code
then the desired programming level (user or installer).
3.
If the programmer code is already set, enter the old programmer code in
Enter old programmer Code:
.
4.
Enter a new programmer code in
Enter new programmer Code:
.
5.
Enter the new programmer code again in
Confirm new programmer Code:
.
6.
Click
OK
.
1.9.10 Utility—Screen Customize
You can change the user level password and select which menu items are available to users when they access
the KX-TVA Maintenance Console using the user level programmer code.
1.
Click
Utility
in the menu bar.
2.
Select
Screen Customize
and
User Level
.
3.
Select the desired tabs, and check the items that you want to be available to users when accessing the
KX-TVA Maintenance Console using the user level programmer code.
4.
Click the
Password
tab and change the password if necessary.
5.
Click
OK
.
Document Version 3.0 2010/06
Programming Manual
33
1.9.10 Utility—Screen Customize
