messages received during the time frame set here. For messages received during times outside of the time
frame, notification will be sent at the beginning of the next time frame.
You can also set the schedule to "Not Use" or "All Day".
Follow the steps below to edit the time frame.
1.
Click a day (
Sunday – Saturday
) tab.
2.
Uncheck "Not Use" or "All Day" if checked.
3.
Click "Time Frame".
4.
Enter the start and end times in the "Start At:" and "End At:" fields, or drag the edges of the time frame to
mark the start and end times.
To copy the schedule of one day to another day
1.
Select a time frame in the desired "copy from" day.
2.
Click
Copy
.
3.
Select a time frame in the desired "copy to" day.
4.
Click
Paste
.
5.
Check "Reversal" to enable notification during the times of day that are not specified.
For example, to enable notification from midnight to 9:00 AM and from 5:00 PM to midnight, set the time
frame from 9:00 AM to 5:00 PM, then check "Reversal".
6.
Check "Delete After Send" if needed.
7.
Click
OK
.
Default
All Day
Value Range
00:00–24:00
Feature Manual References
2.2.20 E-mail Integration
78
Programming Manual
Document Version 3.0 2010/06
2.1.11 E-mail Option