Panasonic KX-TDA0490, Начало работы

Страница: 25 / 142

3.2 Programming the VoIP Gateway Card in the Los Angeles Office
Getting Started 25
3.2 Programming the VoIP Gateway Card in the
Los Angeles Office
Based on the example network in "1.2 Network Devices and Numbering Plan", this section
demonstrates the procedure to programme a VoIP Gateway Card for use in the Los Angeles office,
as the first step of setting up a VoIP network. VoIP communications between the 2 offices will be
possible when the cards, as well as the PBXs, in both offices are fully programmed.
The procedure to programme the card in the Chicago office is given in "3.3 Programming the VoIP
Gateway Card in the Chicago Office". In addition, the procedure to programme the PBX in the Los
Angeles office is given in "4.1 Programming the PBX in the Los Angeles Office".
3.2.1 Starting the IP-GW16 Maintenance Utility
Make sure that a PC is connected directly to the VoIP Gateway Card with an Ethernet cross cable
(see "2.2.2 Connection for Programming").
The card should not be connected to the LAN at this point.
1. Start Internet Explorer from the Start menu.
2. a.
In the Address box of Internet Explorer, type
http://192.168.1.200 (default IP address of the
card).
b.
Press the ENTER key on the keyboard.
Notes
• If you cannot see the log-in screen, return
to "3.1.1 Preparing the PC" and confirm
that your PC has been configured
appropriately.
• If you forget the IP address, you must
initialise the card to the default setting (see
"C1 Initialising the VoIP Gateway Card").
3. a.
In the Username box, type Administrator
(default user name).
b.
In the Password box, type Administrator
(default password).
c.
Click LOGIN .
Note
If you forget the user name or password, you
must initialise the card to the default setting
(see "C1 Initialising the VoIP Gateway Card").