Panasonic KX-TDA0490, Начало работы

Страница: 86 / 142

2.2 Programming
16 Programming Guide
Voice CODEC Settings
Gatekeeper Settings
Parameter & Description Default Value Range
* Voice CODEC Priority 1st–4th
Specifies the type of CODEC for voice communications.
Choose the appropriate CODEC for the network environment
(e.g., bandwidth, CODEC conditions of the remote terminal).
When using multiple CODECs, set them in an appropriate
priority order.
Prior to establishing a call, a negotiation takes place over the
network and the CODEC to be used will be decided
depending on the setting of this parameter.
For details about relations between bandwidth and CODEC,
refer to "Detailed Explanations" in "2.2.3 Voice
Communication Parameters".
Note
When the Fast Connect feature (see under "Others"
below) is disabled, the communicating cards must have
the same first priority CODEC set.
1st: G.729A
2nd: No default
3rd: No default
4th: No default G.723.1,
G.729A,
G.711Mu,
G.711A
Parameter & Description Default Value Range
# Gatekeeper
Specifies the use of a gatekeeper.
For details, refer to "Detailed Explanations".
Don't use Use,
Don't use
* Primary Gatekeeper IP Address
Specifies the IP address of the primary gatekeeper.
192.168.1.3 The following addresses
are invalid:
• Class D addresses
• Class E addresses
• Loopback
addresses
* Primary Gatekeeper Port No.
Specifies the port number of the primary gatekeeper.
1719 1 to 65535
*
Secondary Gatekeeper IP Address
Specifies the IP address of the secondary gatekeeper.
Set this parameter when setting up a secondary gatekeeper
as a redundant backup system.
192.168.1.4 The following addresses
are invalid:
• Class D addresses
• Class E addresses
• Loopback
addresses
* Secondary Gatekeeper Port No.
Specifies the port number of the secondary gatekeeper.
Set this parameter when setting up a secondary gatekeeper
as a redundant backup system.
1719 1 to 65535