manualshive.com logo in svg

Panasonic FP-M Hardware, Руководство пользователя

Поделиться
Скачать
Panasonic FP-M Hardware Скачать руководство пользователя страница 93

2. Features of NPST-GR Software Ver. 3

NPST-GR Software is a programming support tool for the FP-M. The things you can do with the NPST-GR are
briefly introduced in the following:

• Programming

NPST-GR provides three programming modes.

- Programming by entering ladder symbols: the program will be displayed in ladder diagrams

(Ladder symbol mode)

- Programming by entering Boolean: the program will be displayed in ladder diagrams

(Boolean ladder mode)

- Programming by entering Boolean: the program will be displayed in Boolean

(Boolean non-ladder mode)

You can create a program using any of these methods and you can change the method any time. The display will
change automatically according to the method you select. With any method, you can create a program by selecting
instructions from the function keys.
NPST-GR Software also provides various features which enable effective programming such as the ability to
customize it to make program creation easier.
While creating a program, you can copy, delete, move, and search for a part of the program.

• Comment function

You can enter comments for relays and output instructions.
These comments show you which device the relay corresponds to, or for what application the relay is used.

• Program check

With the program checking function, you can check the created program for grammatical errors.

• Monitoring

To support programming capability, NPST-GR Software can monitor the program you created and perform a test
run for verifications. You can check the status of relays and registers, and the programmable controller operating
status. This makes it easy to perform debugging and field adjustments.

• System register setting

You can set the system registers using NPST-GR Software. Using the screen messages makes option selection and
value entry much easier.

• Documentation

You can print-out all the settings you made, such as program and system register settings.

• Data transfer

You can transfer the program created with NPST-GR Software to the programmable controller easily by key
operation. You can also transfer the data to ROM.

• Data management

You can save the data to a disk, which is useful for back-ups and temporary storage before transferring the data to
the programmable controller.

85

5-4. Programming with NPST-GR Software

Содержание FP-M Hardware













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды