manualshive.com logo in svg

Panasonic FP-M Hardware, Руководство пользователя

Поделиться
Скачать
Panasonic FP-M Hardware Скачать руководство пользователя страница 122

6-2. Troubleshooting

1. Points to be Checked When an Error Occurs

When an abnormality is detected, check the following points.

• If the ERR. LED is ON, 

refer to page 115, 

■

When an ERR. LED is ON.

• If the ALARM LED is ON, 

refer to page 117, 

■

When an ALARM LED is ON.

• If the all LEDs are OFF, 

refer to page 117, 

■

When all LEDs are OFF.

• If the output does not work, 

refer to page 118, 

■

Diagnosing output malfunction.

• If the communication error is detected by the NPST-GR Software,

refer to page 121, 

■

When “PLC = COMM. ERR” is displayed on the NPST-GR screen.

• If the PROTECT ERROR is detected by the programming tool,

refer to page 122, 

■

When “PROTECT ERROR” is displayed.

Note:

• Check the entire system including peripheral devices, referring the followings:

- Observe what is happening. 
- Check for error repetition.
- Check the status of indicators.
- Check that power is properly supplied to the programmable controller.
- Check whether the trouble detected is in the programmable controller or in other devices.
- Check whether the trouble detected is in the I/O section or other parts.
- Check whether there is problem with the program or not.

114

6-2. Troubleshooting

Содержание FP-M Hardware













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды