manualshive.com logo in svg

Panasonic FP-M Hardware, Руководство пользователя

Поделиться
Скачать
Panasonic FP-M Hardware Скачать руководство пользователя страница 53

3. Cautions

• Install and remove the boards when all power is turned OFF.
• Do not drop pieces of wire or other objects on the board when wiring.
• Do not use the board where it will be exposed to the following:

- Ambient temperatures of 0˚C to 55˚C (32˚F to 131˚F).
- Ambient humidity of 35 % to 85 % RH.
- Sudden temperature changes that cause condensation.
- Inflammable or corrosive gas.
- Excessive airborne dust or metal particles.
- Benzine, paint thinner, alcohol or other organic solvents or strong alkaline solutions such as ammonia or caustic

soda.

- Excessive vibration or shock.
- Influence from power transmission lines, high voltage equipment, power cables, power equipment, radio 

transmitters, or any other equipment that can generate high switching surges.

- Water in any form including spray or mist.
- Direct sunlight.

• Do not install the board above devices which generate heat such as heaters, transformers or large scale resistors.

• Install as shown below, for heat radiating boards.

• Do not install the board as shown below.

• When mounting a wiring duct, maintain a clearance 

between the board and duct as shown below.
(Illustration: FP-M control board)

• Keep 100 mm (3.937 in.) or more clearance between the FP-M and other equipment in order to avoid heat radiation.

9600

19200

EPROM

RUN REMOTE PROG.

RUN PROG. ERR ALARM.

(BATT.)

EPROM

Wiring duct

Wiring duct

50 mm (1.969 in.)

or more

50 mm (1.969 in.)

or more

INCORRECT

45

4-2. Installation

Содержание FP-M Hardware













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды