1-24
5)
Safety and hygiene
Toner has the property of easily being wind blown.
Toner on skin does not cause any health risk. However inhalation is undesirable
even if a powder is simply dust. Therefore, be careful not to inhale toner.
• Handle the toner carefully when changing cartridges. Developer should also
be handled carefully when poured into the developer unit.
If you inhale a lot of toner by mistake, rinse your mouth out with water.
Toner on the skin should be washed off with soapy water.
• Toner stuck on clothing must be removed in a dry condition (by a vacuum
cleaner, brush or beating) and then washed with soapy water.
Wiping off with benzine, alcohol, or thinner is not recommended because it
may partially melt the components of toner resulting in a stain and spot.
• Toner spilled must be removed with a vacuum cleaner, and then wiped with a
cloth which has been dampened with a neutral detergent.
• If exposed to flames toner and developer will burn. Keep these supplies away
from open flames.
• Any used consumables (photoreceptor, developer and toner) should be recycled.
• Wear rubber gloves, eye protection etc. before handling any solvents such as
IPA.
Содержание FP-D350
Страница 198: ...4 77 PCB Connector and Signal Information 2 Control Panel PCB A FP D250 D350 Series CN354 CN355 Not used ...
Страница 332: ...4 211 PCB Connector and Signal Information 2 Control Panel PCB A FP D450 D600 Series CN354 CN355 Not used ...
Страница 517: ...5 79 Troubleshooting Code Item Function Factory setting US38 User information list 0 Stop 0 1 Start ...