Panasonic EBL512 G3 V1.1.x, Руководство по эксплуатации

Страница: 152 / 162

Panasonic Electric Works Nordic AB
MEW01349 Rev: - Operating Instructions Fire alarm system EBL512 G3, V1.1.x
150
33 Change access code for daily
duties (H10)
For security reasons, the default code should be changed.
Action Text in display Comments
"Access"
According to chapter
"Access", see page 85.
Scroll to menu H10.
H10 Change access code for daily duties
"
↲
" Access code:
New code: Verify:
Enter the old code, the
new code and the new
code again. Access code: ****
New code: **** Verify: *** *
The digits are replaced by
**** in the display.
Incorrect access code, NO change
The access code was not
correct. Try again.
H10 Change access code for daily duties The access code was
correct and is now changed
to the new code. Scroll to
another menu or press
"ESC".
NOTE! After change of access code it is recommended do "Safe
shutdown of the control unit" (see menu H8/S8). This will save the
SSW data (e.g. the new code) in a Flash ROM (see page 137).
If the valid access code is unknown a "back door code" is available.