Panasonic EBL512 G3 5000, Инструкции по планированию

Страница: 11 / 168

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
9
1 Introduction
EBL512 G3 Planning Instructions is a document
1
intended to be used
by planning engineers as well as service / commissioning engineers.
This document should be read in conjunction with the drawings
according to the valid Table of drawings and the EBL512 G3
Operating Instructions MEW01473.
When planning a fire alarm installation the national regulations have
to be obeyed. A lot of detector types can be used. Detector coverage
area and detector placing in the room / building, etc. are matters for
the planning engineers and are not described in this document.
Due to continual development and improvement, different S/W
versions might be found. This document is valid for
S/W United
version 2.7.x . On the date / revision date of the document x = 0 .
EBL512 G3 S/W United version 2.7.x . is a bit special since it can be
used only for EBL512 G3 units in a TLON Network with both
EBL512 units
2
and EBL512 G3 units, i.e. a mixed network.
Since the EBL512 G3 control unit (c.i.e.) is produced for many
countries the look, the texts, the functions, etc. might vary.
Products
Consists of one or more parts (HW) according to a Product Parts
List . A product has:

a type number
5000 EBL512 G3 c.i.e. Configured for 128, 256 or 512
addresses and with or without printer depending on article
number.
5001 EBL512 G3 c.i.e. No front panel and no Plexiglas in the
door. Configured for 128, 256 or 512 addresses depending on
the article number.

an article number is often the same as the type no. but a country
code can be added (e.g. SE for Sweden). If the letters PRT also
are added in the article number the product comes with a printer.
If digits are added to the article number they are showing the
number of addresses configured (e.g. 5000PRTSE
-128 ).
1
File name: L:\User documents\512 G3\United 2.7.x\MEW01472 (Rev -
).doc
2
The EBL512 units have to have a special S/W version (2.7.x), which makes
it possible to use EBL512 G3 units (5000 / 5001) together with EBL512 units
(1548 / 1549 / 1550), in a TLON Network, i.e. a mixed system .