manualshive.com logo in svg

Panasonic DBS-2.3-400, Руководство по программированию

Поделиться
Скачать
Panasonic DBS-2.3-400 Скачать руководство пользователя страница 466

Appendix C. EX 1.0 Feature Update

Section 400-Programming

Page C-18

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

You can program the *71 ring select command into an FF key. Pressing the 
key toggles between “Analog Port RING” and “Key Tel RING”. When the 
analog port is set to ring, the FF key LED lights red. When the key 
telephone is set to ring, the LED is off. 

Notes

Phone Restrictions

• The Analog Adapter will work on the large-display phone only (VB-

44225).

• A dial-pulse SLT will not function on the analog port.
• Stutter Dial Tone (indicating Call-Forwarding mode, Do-Not-Disturb 

mode, etc.) will not function on an SLT connected to the Analog 
Adapter.

• An analog phone connected to the Analog Adapter cannot program or 

access speed dials.

Incoming Calls

• You cannot program both devices to ring simultaneously.

• The “*71” code will not work if the other device is in use.

• The “*71” code will not work if FF3 (ExtPort)# 51# is set to “0”.

• If set to “Analog port RING”, the large-display phone will work like an 

SLT/OPX (no page announcements, no voice calls from other 
extensions, etc.).

• If the phone is in CF/DND (Call-Forward or Do Not Disturb), the phone 

will remain in CF/DND even if the ringing device is changed via the 
*71 code.

• The incoming ring pattern for the analog device is the same as for the 

digital key telephone (determined by the Extension Ring Pattern in FF3 
(ExtPort)# 39# (0-9)#). If this address is set to “0” (determined by CO), 
the analog device will automatically default to “1 second ON, 3 seconds 
OFF.”

Ring Patterns Not Applicable to Analog Device.

 The following ring 

pattern addresses 

will not

 affect the analog device:

Analog Transfer Ring Pattern FF1  2#  1#  31#  (0-6)#
SLT DISA Ring Pattern

FF1  2#  1#  34#  (0 or 1)#

Inbound Ring Pattern

FF2  (Trunk)#  17#  (0-9)#

Flash Interaction

.  Any disconnect signal sent to the analog port must be 

greater than the SLT Flash Control; otherwise the disconnect signal will be 
interpreted as a flash and the call will be placed on hold.

Содержание DBS-2.3-400



































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды