manualshive.com logo in svg

Panasonic DBS-2.3-400, Руководство по программированию, Страница: 342 / 578

Поделиться
Скачать
Panasonic DBS-2.3-400 Скачать руководство пользователя страница 342

Chapter 4. Ringing and Hunt Groups (FF4)

Section 400-Programming

Page 4-10

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

Programming

Related Programming

Offhook Signal:   FF3  (ExtPort)#  7#  (0 or 1)#

Notes

Setting Hunt Group Types in Later CPC Versions.

   Set hunt group types for 

CPC-AII versions, and for CPC-B Version 2.0 or higher, in FF4 3# 
(HuntGrp)# 2# (0-2)#.

Hunt Group Membership Restriction.

   An extension can be a member of 

only one hunt group.  Hunt group extensions cannot also belong to call 
coverage groups.

Absence Message, Call Forwarding, and DND Interaction.

   If a call enters 

a hunt group in which all extensions are busy, the hunt feature will wait for 
the first available extension.  If an extension within the hunt group (except for 
the first extension) is set for Call Forwarding, Absence Message, or DND, the 
hunt feature will skip that extension and proceed to the next position in the 
hunt group.  If the first extension is set for Call Forwarding, Absence 
Message or DND, the hunting feature will not work.

Call Routing When All Hunt Groups Are Busy.

   If all members of all 

searched hunt groups are busy, the call will be parked for only the first group 
searched.

SLT Call Hold Restriction.   

If an SLT hunt group member takes a trunk call, 

puts it on hold, and replaces the handset, additional trunk calls will not hunt to 
idle extensions.

Offhook Signal Setting for Hunt Group Members.

   Offhook signaling 

should be disabled on extensions that are hunt group members.

FF4  3#  (1-8)#  1#  (0 or 1)#

  

Hunt Group No.         

0=Terminal Hunting

1=Circular Hunting

Содержание DBS-2.3-400



































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов