Panasonic DBS-2.3-400, Руководство по программированию

Страница: 346 / 578

Chapter 4. Ringing and Hunt Groups (FF4) Section 400-Programming
Page 4-14 DBS Manual - Revised April 2000 DBS-2.3/9.2-400
Hunt Group Members
Software Version: CPC-A; CPC-B Versions prior to 2.0
Address: FF4 3# (HuntGrp)# (3-10)# (ExtNo.)#
Description
Use this option to place an extension at a specific position within a hunt
group. Hunt groups can contain a maximum of 8 extension positions.
Programming
To assign an extension to a position within a hunt group ...
To clear an extension from a hunt group position ...
Related Programming
Offhook Signal: FF3 (ExtPort)# 7# (0 or 1)#
Notes
Assigning Extensions to Hunt Groups in Later CPC Versions. For CPC-
AII versions, and CPC-B Version 2.0 or higher, use FF4 3# HuntGrp# (5-
20)# (ExtNo.#) to assign extensions to hunt groups.
Hunt Group Membership Restriction. An extension can be a member of
only one hunt group. Hunt group extensions cannot belong to call coverage
groups.
Offhook Signaling for Hunt Group Members. Offhook signaling should be
disabled on extensions that are assigned as hunt group members.
FF4 3# (1-8)# (3-10)# (10-69 or 100-699)#
Hunt Group No. Position: Extension Number
3=Position 1
4=Position 2
5=Position 3
6=Position 4
7=Position 5
8=Position 6
9=Position 7
10=Position 8
FF4 3# (1-8)# (3-10)# CONF ON/OFF
Hunt Group No. Hunt Group Positions 1-8
(using address numbers 3-10)