Panasonic DBS-2.3-400 Скачать руководство пользователя страница 337

Страница: 337 / 578

Section 400-Programming

Chapter 4. Ringing and Hunt Groups (FF4)

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

Page 4-5

CO Night Ring Assignments

Software Version: All Versions
Address: FF4 2# (ExtPort)# (Trunk)# (0 or 1)#

Description

This program determines which extension(s) will receive incoming calls on a
particular trunk when the DBS system is in “Night” mode.

Programming

Notes

Default Attendant Ring Assignments.

All trunks are set to ring on ports 1

and 2 (the Primary and Second Attendants) by default.

Routing of Trunks With No Ring Assignments

. If a trunk is not assigned to

ring a specific extension, it will still ring the Attendant phone.

Night Mode.

Beginning with CPC-AII/B Version 7.0, there are two separate

Night modes -- “Night” and “Night 2”. This address controls “Night” ring
assignments (see FF4 9# 1# for “Night 2” ring assignments).

FF4 2# (1-73 or 1-145)# (1-64)# (0 or 1)#

Trunk Number

Extension Port

0=Trunk does not ring.

1=Trunk rings.

Note:

Use port 73 (for single-cabinet systems) or 145 (for double-

cabinet systems) to assign ringing to an external paging or Universal
Night Answer (UNA) device.

Содержание DBS-2.3-400



































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DBS-2.3-400

Отзывы:

Panasonic DBS-2.3-400, Руководство по программированию, Страница: 337 / 578

Результаты поиска

Содержание DBS-2.3-400

Отзывы: