Panasonic DBS-2.3-400 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 578

Panasonic DBS-2.3-400 Скачать руководство пользователя страница 70

Chapter 1. System Programming (FF1)

Section 400-Programming

Page 1-26

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

API/AEC Slot Assignment

Software Version:

CPC-A Version 3.3 or higher; CPC-AII; and CPC-B Version 5.0 or higher

Address: FF1 2# 1# 20# (2-9 or 2-18)#

Description

This program is only used with third-party API applications. Its purpose is to
designate which Analog Extension Card (AEC) is used for voice channel
connections to the API product.

Programming

Related Programming

Voice Mail Busy Tone: FF1 2# 1# 21# (0 or 1)#

Terminal Type: FF3 (ExtPort)# 2# (21-28, 31-38 or 41-48)#

Notes

Third-Party Voice Mail Systems Not Integrated With the DBS.

In these

systems, the API card is not required. Set up Call Forward ID codes so that
the DTMF codes will be sent to the appropriate Voice Mail box (ON/OFF -
PROG - AUTO - * - [Ext] - [up to 16 char.] - HOLD). See

Section 700-

Feature Operation

for more information.

FF1 2# 1# 20# (2-9 or 2-18)#

Analog Extension Slot used for voice

paths to a third-party API product.

NOTE:

Do not set this to “1” (slot 1

must be a digital port).

Valid Ranges --

CPC-A and CPC-AII: 2-9
CPC-B: 2-18

Default:

** (no assignment)

«
...
68
69
70
71
72
...
»

Содержание DBS-2.3-400



































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов