Panasonic DBS-2.3-400, Руководство по программированию, Страница: 199 / 578

Section 400-Programming Chapter 1. System Programming (FF1)
DBS-2.3/9.2-400 DBS Manual - Revised April 2000 Page 1-155
Immediate Glare Timer
Software Version: CPC-B Version 4.0 or higher
Address:
FF1 8# 4# 2# 9# (0-15)#
Description
“Glare” occurs when both ends of the same trunk are seized simultaneously,
resulting in connection between an incoming call and a DBS phone user
attempting to access an outside line.
Use this address to prevent glare when immediate-start signaling is used.
This timer determines how long the DBS will search for an incoming call on a
trunk channel before connecting a DBS extension user to it (60 ms by
default). The timer begins when the extension goes off-hook.
Programming
Table 1-45. Immediate Glare Timer values
Setting Value
0 The DBS does not check for glare
1 20 ms
2 40 ms
3 60 ms
4 80 ms
5 100 ms
6 120 ms
7 140 ms
8 160 ms
9 180 ms
10 200 ms
11 250 ms
12 300 ms
13 350 ms
14 400 ms
15 450 ms
FF1 8# 4# 2# 9# (0-15)#
Immediate Glare Timer setting
Default:
3 (60 ms)
(see table below)