manualshive.com logo in svg

Panasonic DBS-2.3-400, Руководство по программированию, Страница: 172 / 578

Поделиться
Скачать
Panasonic DBS-2.3-400 Скачать руководство пользователя страница 172

Chapter 1. System Programming (FF1)

Section 400-Programming

Page 1-128

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

NIGHT Key Operation.  

 If only one of the Auto Mode Start Times is set, the 

Attendant NIGHT key can be used to manually switch to another mode.  For 
instance, if Night mode has been activated automatically, the Attendant can 
press the NIGHT key to go into Day mode.  (However, the Attendant must 
wait at least 3 minutes after the mode is automatically activated, before using 
the NIGHT key to switch the mode again.)

In CPC-AII/B versions prior to 7.0, if both Auto Day and Auto Night Mode 
Start Times are set, the Attendant NIGHT key cannot be used to manually 
switch modes.  (However, it will work in Version 7.0 or higher; or press #520 
to toggle between Day, Night and Night 2 modes.)

SUGGESTION (for versions prior to 7.0):

  Set only the Auto Night 

Mode Start Time, so that the DBS will automatically switch to Night 
mode each night -- and each morning the Attendant phone can press 
the NIGHT key to manually switch to Day mode.

Required Intervals Between Auto Day and Night Modes.   

If you set both 

Auto Mode Start Times, it is recommended that the start times differ by at 
least 1 hour.

Содержание DBS-2.3-400



































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов