manualshive.com logo in svg

Panasonic DBS-2.3-400, Руководство по программированию, Страница: 93 / 578

Поделиться
Скачать
Panasonic DBS-2.3-400 Скачать руководство пользователя страница 93

Section 400-Programming

Chapter 1. System Programming (FF1)

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

  Page 1-49

Voice Mail Ports and Hunt Groups.

   The DID/DNIS digits can be sent to a 

specific Voice Mail port or a Voice Mail hunt group.

Second Hunt Group.

   If the DID/DNIS call rings into a hunt group that is 

programmed to transfer calls to a second hunt group, the DID/DNIS call will 
not be transferred to the second hunt group.

Third-Party Voice Mail.

   This feature can be used with Panasonic’s Voice 

Mail system or with third-party Voice Mail systems.  If the feature is used 
with third-party Voice Mail systems, the Voice Mail can be connected 
through analog extension ports or OPX ports.

Call Forward ID Code for DID/DNIS Calls To An Extension.

   If a DID/

DNIS call is assigned to ring an extension, and the extension is programmed 
to forward to Voice Mail, only the Call Forward ID Code will be transmitted 
to Voice Mail (the DID/DNIS digits will not).

DID/DNIS Data Transmission.

   The DID/DNIS digits are transmitted over 

the API link using the existing API key code packet.

Содержание DBS-2.3-400



































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов