manualshive.com logo in svg

Panasonic DBS-2.3-400, Руководство по программированию, Страница: 268 / 578

Поделиться
Скачать
Panasonic DBS-2.3-400 Скачать руководство пользователя страница 268

Chapter 2. Trunk Programming (FF2)

Section 400-Programming

Page 2-20

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

5.  If Fractional T1 (using only a portion of the 24 available T1 channels) 

is implemented, make sure that the number of trunks set to Circuit 
Type “T1” matches the programmed 

Number of T1 Channels

 (FF1 

8# 4# 4/5# 1# 2# 0-24#).

6.  In CPC-B Versions 5.0 to 6.02, if trunk usage on an analog trunk card 

is divided between T1 and analog, make sure that the T1 trunks are 
closed from analog usage in the 

T1 Trunk Closure

 address (FF1 8# 

7# 1-2# 1-4# 1-8# 0-1#).

Caller ID Circuit Type Considerations:

1.  Available only with CPC-AII and CPC-B Version 6.1 or higher.

2.  Caller ID requires the following cards:

• 8-port Loop Start Trunk Card (VB-43511A)
• Caller ID Card (VB-43551)
• MFR Card (VB-43431) (if using Caller ID Automatic DISA)
• CPC-B Card (VB-43411) or CPC-AII Card (VB-43412)

3.  Caller ID refers to calling party information transmitted from a local 

CO to the DBS. Calling party information transmitted in ANI format 
from interexchange carriers (IXC’s) is not supported by the DBS at 
this time.

4.  Caller ID data is transmitted from the local CO to the DBS between 

the first and second rings. The Caller ID Card and the Loop Start 
Trunk Card collect the data and distribute it to the appropriate 
extension via the CPC Card. The extension displays the Caller ID 
information (if the phone has an LCD) for a programmable length of 
time.

5. See 

Caller ID Installation and Operation (Section 510)

 for complete 

instructions and ordering specs.

Содержание DBS-2.3-400



































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов