manualshive.com logo in svg

Panasonic DBS-2.3-400, Руководство по программированию, Страница: 183 / 578

Поделиться
Скачать
Panasonic DBS-2.3-400 Скачать руководство пользователя страница 183

Section 400-Programming

Chapter 1. System Programming (FF1)

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

  Page 1-139

STEP 4 -- TRUNK CONFIGURATION

Description:
(continued)

The “Free run” setting is the only setting that can be 
entered for more than one sync source.  One of the three 
sync sources should be set to “Free run”, so that the T1 can 
provide its own clocking if the network clock fails.

For changes to this parameter to take effect, the system 
must be powered down, then powered back up.

Options:

0=None   (default for Sync Sources 2 and 3)

1=T1 of the master cabinet
2=T1 of the slave cabinet

3=Free run (internal clocking)   (default for Sync
    Source 1)

Examples:

In most cases, the sync sources should be set as follows for 
these system configurations:

T1 in a Single Cabinet, or T1 in a Master Cabinet:

 

   Sync Source 1 = 

1 (T1 of the master cabinet)

    Sync Source 2 = 

3 (Free run)

    Sync Source 3 = 

0 (None)

T1 in a Slave Cabinet:

    

Sync Source 1 = 

2 (T1 of the slave cabinet)

    Sync Source 2 = 

3 (Free run)

    Sync Source 3 = 

0 (None)

T1s in the Master and Slave Cabinets:

    

Sync Source 1 = 

1 (T1 of the master cabinet)

    

Sync Source 2 = 

2 (T1 of the slave cabinet)

    

Sync Source 3 = 

3 (Free run)

Address:

FF1  8#  4#  4#  1#  1#  (0 or 1)#   for Master Cabinet
FF1  8#  4#  5#  1#  1#  (0 or 1)#   for Slave Cabinet

Description:

Specify the trunk configuration.

Options:

0=Analog only

1=T1 and analog trunks

Address: 
(continued)

FF1  8#  4#  1#  2#  (1-3)#   for Sync Source 1
FF1  8#  4#  1#  3#  (0-3)#   for Sync Source 2
FF1  8#  4#  1#  4#  (0-3)#   for Sync Source 3

Содержание DBS-2.3-400



































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов