Panasonic CS-RZ25TKR, Руководство по обслуживанию

Страница: 103 / 196

103
15.1.4 Compressor Overheating Prevention Control

Instructed frequency for compressor operation will be regulated by compressor discharge temperature. The
changes of frequency are as below.

If compressor discharge temperature exceeds 103°C, compressor will be stopped, occurs 4 times per 20 minutes,
timer LED will be blinking. (“F97” is indicated.)
15.1.5 Low Pressure Prevention Control (Gas Leakage Detection)

Control start conditions
o
For 5 minutes, the compressor continuously operates and outdoor total current is between 0.75A and 0.95A
(RZ25 ~ 35TK), 1.38A and 1.65A (RZ50TK), 1.89A and 2.75A (RZ60TK), 1.88A and 2.85A (Cooling), 2.85A
and 3.57A (Heating) (RZ71 ~ 80TK).
o
During Cooling and Soft Dry operations:
Indoor suction temperature - indoor piping temperature is below 4°C.
o
During Heating operations :
Indoor piping temperature - indoor suction is under 5°C.

Control contents
o
Compressor stops (and restart after 3 minutes).
o
If the conditions above happen 2 times within 20 minutes, the unit will:

Stop operation
 Timer LED blinks and “F91” indicated.
15.1.6 Low Frequency Protection Control 1

When the compressor operate at frequency lower than 24 Hz continued for 20 minutes, the operation frequency
will be changed to 23 Hz for 2 minutes.
15.1.7 Low Frequency Protection Control 2

When all the below conditions comply, the compressor frequency will change to lower frequency.
Temperature, T, for: Cooling/Soft Dry Heating
Indoor intake air (°C) T < 14 or T ≥ 30 T < 14 or T ≥ 28
Outdoor air (°C) T < 13 or T ≥ 38 T < 4 or T ≥ 24
Indoor heat exchanger (°C) T < 30 T < 0
Compressor = OFF
Compressor Frequency
Reduce
Compressor Frequency
Maintain
Free
103°C
99°C
96°C
88°C
87°C
86°C
Comp. temperature