17
Security Measures
Do not forget your password. If your Supervisor Password is forgotten you
will be unable to use your computer. Contact your technical support office.
When running the Setup Utility, do not leave your computer even for a short
time, as the possibility exists for the password to be set/changed by another
person.
Setting the Supervisor Password
(enabling, changing, disabling)
1
Run the Setup Utility
(
page 47
)
2
Using either or , select [Security]
3
Using either or , select [Set Supervisor Password] and
press Enter
4
<Only when the Supervisor Password has been set>
Enter your password at [Enter Current Password] and press
Enter
5
Enter your password at [Enter New Password] and press
Enter
To disable the Supervisor Password
Press only Enter
6
Re-enter your password at [Confirm New Password] and press
Enter
To disable the Supervisor Password
Press only Enter
7
At [Setup Notice], press Enter
8
Press F10 and select [Yes], then press Enter
CAUTION
Your password will not be displayed on the screen.
Limit your password to seven characters. Note that there is no distinction
between upper and lower case letters.
Do not input your password while holding down on Shift or Ctrl .
Use only the upper horizontal row of numeric keys to input your password.
Only the alphabet keys or number keys can be used. Note that the space bar
and function keys cannot be used.
Disabling the Supervisor Password also disables the User Password.
NOTE
