Panasonic CF-C1 Series Скачать руководство пользователя | Manualshive

Страница: 74 / 216

background image

74

CD/DVD Drive

While the drive is being accessed

Do not open the drive or move the computer while the drive is being accessed.

Doing so could cause the disc to shift position and this may damage the disc, or cause the drive to malfunction.

In addition, after running an application involving access to a disc, close the application before opening the disc cover.
Do not move the computer while in the midst of writing or rewriting, as this may result in a writing failure.
Do not apply excessive force to the disc cover.
Do not operate the drive power/open switch.
Do not shock the computer by removing or inserting cables and cards, etc. This may result in a read or write malfunction.

Disc handling care

Do not use deformed, warped, or irregularly shaped discs.

Reading of disc may not be possible depending on the disc conditions (cracks, dirt, modification, data recording quality,
copy protection, recording equipment/software that was used to create the disc, etc.)
Before using a disc, carefully read the operating/handling instructions and package of the disc.
If the discs are not handled appropriately, they may become dirty or scratched. Furthermore the writing speed may get
slower and the data may not be correctly written on or read from the disc. Other damage may cause a drive failure.
Note the following precautions.
• Do not touch the disc surface (the side with no printing).
• Keep the disc surface clean and free from dirt, dust, fingerprints and scratches.
• Do not write on the surface of the disc with a ballpoint pen or other writing instrument.
• Do not attach stickers to discs.
• Do not drop, bend, or place heavy objects on top of discs.
• Do not place or store discs in locations exposed to heat, direct sunlight, humidity or dust.
• If a disc is brought from a cold to a warm location, condensation may form on the disc. For read-only discs, wipe off the

condensation using a soft, dry, lint-free cloth before using the disc. For recordable/rewritable discs, wait until the
condensation dries.

• When not using discs, keep them in their protective cases or cartridges.

<For read-only discs>
Wipe discs with a dry, soft cloth from the center toward the edge.
If discs get very dirty, wipe with a moist, soft cloth from the center toward
the edge, then wipe again with a dry cloth to take up remaining moisture.
<For recordable/rewritable discs>
It is recommended to use the Panasonic disc cleaner.
Do not use a cloth.

To clean discs

Correct

Incorrect

«
...
72
73
74
75
76
...
»

Содержание CF-C1 Series

























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CF-C1 Series

Бренд: Acer Страницы: 24

Бренд: Acer Страницы: 24

Бренд: PMC Страницы: 126

Бренд: Wincomm Страницы: 58

ProArt PA Series

Бренд: Asus Страницы: 40

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 80

Бренд: Asus Страницы: 76

Бренд: Asus Страницы: 75

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 90

Бренд: Asus Страницы: 56

P5G43 V4-Series

Бренд: Asus Страницы: 110

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 56

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 112

Бренд: Asus Страницы: 170

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды