Panasonic AW-HE130KP страница 69 Скачать руководство пользователя

Страница: 69 / 126

Live screen [

Live] : Multi display mode

In this mode, the images of a multiple number of cameras can be monitored on one screen (called the ‘multi screen’).

The image of 4 cameras or max. 16 cameras can be monitored at one time.

When the camera title of any of the images is clicked, the live screen [Live] (single display mode) of the camera concerned is displayed as a separate

window.

In order to use the multi screen, the cameras whose images are to be shown on the multi screen must be set ahead of time.

With one group consisting of 4 cameras, up to four groups of cameras (a total of 16 cameras) can be registered. (→ page 86)

Multi screen consisting of 4 sub-screens

Multi screen consisting of 16 sub-screens

Multi-Screen list box [

Multi-screen]

The live screen [Live] display method is selected here.

(Single)

The IP videos of the connected camera are

displayed.

(4Split 4/1 Group)

When the cameras for multi-screen display

have been set ahead of time using the

multi-screen(→ page 86), it is possible to view

a multiple number of IP videos on a single

screen. (Multi display mode)

(4Split 4/2 Group)

(4Split 4/3 Group)

(4Split 4/4 Group)

(16Split)

<NOTE>

• The IP videos displayed on the multi screen are JPEG images only.

• IP images are in JPEG format only and audio is not output.

• Images are stretched vertically to fit the [4:3] aspect ratio of the multi

screens.

• It is not possible to transfer from the live screen [Live] to the multi

screen if the unit’s power has been turned off, or the network cable

has been disconnected, while IP videos are being displayed.

Web screen operations (continued)

Содержание AW-HE130KP































































































































Результаты поиска

Содержание AW-HE130KP

Отзывы:

Похожие инструкции для AW-HE130KP

Бренды по названию

Популярные бренды

Panasonic AW-HE130KP, Руководство по эксплуатации

Результаты поиска

Содержание AW-HE130KP

Отзывы:

Похожие инструкции для AW-HE130KP

Бренды по названию

Популярные бренды