Up to four units can be operated using one wireless remote control.
Up to five units can be operated using one controller.
Select the unit (or units) to be operated from the wireless remote control
or controller.
Even when using only one unit, it must still be selected.
When performing operations from a wireless
remote control
To select the unit using the wireless remote control, the IR ID switches
on the unit’s back panel must be set.
For details of the IR ID switch settings, refer to page 18 and page 22.
1.
Press the <CAM1>, <CAM2>, <CAM3>, or <CAM4>
button.
The unit’s status display lamp blinks green when a signal matched by
the remote control ID has been received, and it blinks orange when a
signal that is not matched by the remote control ID has been received.
When performing operations from a controller
When using an AW-RP50, AW-RP120, or AK-HRP200
Refer to the operating instructions for the controller.
Selecting the units
26
27
