Others 1/4 screen
Others 1/4
Install Position Desktop
Smart Picture Flip Off
Flip Detect Angle ----
Preset Speed Table Fast
Preset Speed 20
Preset Scope Mode A
Freeze During Preset Off
Speed With Zoom POS. On
Return
Install Position [Desktop, Hanging]
“Desktop” or “Hanging” is selected here as the method used to install
the unit.
Desktop
Stand-alone installation
Hanging
Suspended installation
• When [Hanging] has been selected, the top, bottom, left and right
of the images will be reversed, and up/down/left/right control for
panning and tilting will also be reversed.
Smart Picture Flip [Off, Auto]
When the tilt becomes the angle set for [Flip Detect Angle], the image
will be flipped in the vertical direction automatically.
Off
The picture is not turned upside down (flipped).
Auto
The picture is automatically turned upside down (flipped).
Flip Detect Angle [60° to 120° ]
Set the tilt angle at which the image will be flipped in the vertical
direction automatically when [Smart Picture Flip] is set to [Auto].
Preset Speed Table [Slow, Fast]
Set the preset speed table (Slow, Fast). During preset playback,
presets are performed at [Preset Speed] (1 to 30) values that are
based on the table set here.
• When [Preset Speed Table] is set to [Fast], [Preset Speed] values
equivalent to the AW-HE120 will be applied.
Preset Speed [1 to 30]
Set the pan/tilt movement speed used when recalling camera
orientation information registered to the preset memory (30 steps).
<NOTE>
• When you set large [Preset Speed] values, the image may sway
when the movement stops.
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
Mode A
Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,
white balance adjustment value
Mode B
Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C
Pan, Tilt, Zoom (including digital zoom), Focus
Freeze During Preset [Off, On]
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still
of the image immediately preceding the start of preset playback
being output. The image freeze is released when preset playback is
finished.
Speed With Zoom POS. [Off, On]
“Off” or “On” is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
When [On] is set, the panning and tilting operations will become
slower in the zoom status.
This function has no effect during preset operations.
Return
Return to the previous menu level.
Others 2/4 screen
Others 2/4
Focus Mode Auto
Focus ADJ With PTZ. ----
Digital Zoom Disable
Max Digital Zoom ----
Digital Extender Off
OIS Off
Tally Enable
Tally Brightness Low
Return
Focus Mode [Auto, Manual]
Select auto or manual mode for the focus adjustment function.
Auto
Always adjust focus automatically.
Manual
Adjust focus manually.
<NOTE>
• [Focus Mode] cannot be set to [Auto] when [Frame Mix] is set to
[18dB] or [24dB].
Focus ADJ With PTZ. [Off, On]
“Off” or “On” is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
When [Off] is set, adjust the focus as required after zooming or set
the focus to the auto mode.
This item can be selected only when [Manual] has been selected as
the [Focus Mode] setting.
Digital Zoom [Disable, Enable]
“Enable” or “Disable” is set here for the digital zoom function.
If zooming is performed toward the Tele end beyond the maximum
position when [Enable] has been selected, the digital zoom can be
operated continuously. Zooming will stop temporarily at the position
where the optical zoom and digital zoom are switched so after it has
stopped at this position, proceed with zooming again.
When the setting is changed to [Disable] while already in the digital
zoom region, the zoom will automatically move to the maximum
position of the optical zoom.
<NOTE>
• The digital zoom is set to OFF when color bars are displayed during
digital zooming.
Max Digital Zoom
[x2, x3, x4, x5, x6, x7, x8, x9, x10]
Set the maximum digital zoom magnification.
Digital Extender [Off, On]
Turn the digital extender function off/on.
When this is set to [On], the digital zoom will be fixed at 1.4x.
When [Digital Zoom] is set to [Enable], [Digital Extender] is disabled.
OIS [Off, On]
Turn the optical image stabilization (OIS) function off/on.
<NOTE>
• The optical image stabilization function's level of correction is
reduced during pan/tilt operations.
Tally [Disable, Enable]
“Enable” or “Disable” is set here for the function which turns on or
turns off the tally lamp using the tally control signal.
Tally Brightness [Low, Mid, High]
Adjust the brightness of the tally LED.
<NOTE>
• When this is set to [Low], the brightness is equivalent to that of the
AW-HE120.
Return
Return to the previous menu level.
56
Camera menu items (continued)
57
