Zoom
(-)
Use this to adjust the zoom (magnification) in the Wide
direction.
(×1.0)
Use this to adjust the zoom (magnification) to 1.0x.
(+)
Use this to adjust the zoom (magnification) in the Tele
direction.
(D. Zoom)
Use this to enable or disable the digital zoom.
(D. Ext)
Enable or disable the digital extender.
This operates only when digital zoom is disabled.
Focus
(Near)
Use this to adjust the focus in the Near direction.
It does not work during automatic adjustments.
(O.T. AF)
When this is pressed while the focus is being adjusted
manually, the focus will be temporarily adjusted
automatically. It does not work during automatic
adjustments.
(Far)
Use this to adjust the focus in the Far direction.
It does not work during automatic adjustments.
(Auto)
Use this to switch between auto and manual focusing.
Brightness
(-)
Use this to make the image darker.
It does not work during automatic adjustments.
(+)
Use this to make the image lighter.
It does not work during automatic adjustments.
(Auto)
Use this to switch the picture brightness adjustment
between auto and manual.
Control pad and its buttons
To adjust the image in the horizontal or vertical
direction (panning or tilting), left-click the pad and the
buttons.
The more the outside of the pad is clicked, the faster
the camera operates.
Adjustment is also possible by dragging the mouse.
Right-click the pad to initiate zooming and focusing.
When the top half of the pad is clicked in the up or
down direction, the zoom (magnification) is adjusted
in the Tele direction; conversely, when the bottom half
of the pad is clicked, the zoom is adjusted in the Wide
direction.
When the left half of the pad is clicked in the left or right
direction, the focus is adjusted in the Near direction;
conversely when the right half of the pad is clicked, the
focus is adjusted in the Far direction. The zooming can
also be adjusted by operating the mouse wheel.
<NOTE>
• When the mouse is used for dragging and dropping from the control
pad area to a position outside this area, the panning, tilting and
other operations will not stop.
In a case like this, click the control pad area to stop these
operations.
Speed
Use this to select the speed at which the pan, tilt, zoom,
focus, and brightness operations are to be performed.
Speed With Zoom POS.
“Off” or “On” is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
Setting value:
Off
The panning and tilting operations will not become slower in the
zoom status.
On
The panning and tilting operations will become slower in the
zoom status.
This function has no effect during preset operations.
Focus ADJ With PTZ.
“Off” or “On” is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
Setting value:
Off
Out-of-focusing is not compensated.
On
Out-of-focusing is compensated.
When [Off] is set, adjust the focus as required after zooming or set
the focus to the auto mode.
This item can be selected only when [Manual] has been selected as
the [Focus Mode] setting.
Preset Setting
Preset Speed Table
Set the preset speed table (Slow, Fast).
During preset playback, presets are performed at [Preset Speed] (1 to
30) values that are based on the table set here.
Setting value:
Slow
Set the preset speed table to slow.
Fast
Set the preset speed table to fast.
Preset Speed
Set the pan/tilt movement speed used when recalling camera
orientation information registered to the preset memory (30 steps).
Setting range:
1 to 30
<NOTE>
• When you set large [Preset Speed] values, the image may sway
when the movement stops.
• When [Preset Speed Table] is set to [Fast], [Preset Speed] values
equivalent to the AW-HE120 will be applied.
Preset Scope
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
Setting value:
Mode A
Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,
white balance adjustment value
Mode B
Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C
Pan, Tilt, Zoom (including digital zoom), Focus
Freeze During Preset
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still
of the image immediately preceding the start of preset playback
being output. The image freeze is released when preset playback is
finished.
Setting value:
Off
Do not freeze images during preset playback.
On
Freeze images during preset playback.
82
Web screen configurations (continued)
83
