Panasonic AV-HS6000 Скачать руководство пользователя страница 97

Страница: 97 / 173

– 97 –

Chapter 5 Basic Operations — Video memory

When [Mode] in the [Play3] column is set to [Loop], the operation of [Lead] is performed.

Amount of transition

PGM-A

PST-B

Clip playback

[Mode]: [Lead]

[Reverse]: [Off]

Clip playback

[Mode]: [Last]

[Reverse]: [On]

Standby

Lead

Playback

Standby

Lead

Playback

Standby

Lead

Playback

Reverse

playback

Standby

Last

Reverse playback

Standby

Last

Reverse playback

Standby

Last

Reverse

playback

Playback

In point

Out point

Trimming moving images

Set the position where the playback of the moving images is to start (IN point) and the position when it is to end (OUT point). Moving images that have
been trimmed are played back from the IN point to the OUT point.

Select the <MEM> button

→

[CLIP]

→

[Play Clip1] to [Play Clip4] tabs.

Select an item in the [Edit] column.

This function will be available in V2.00.00 or higher.

When [Pause] in the [Play1] column is selected after playback, moving images can be stopped at any frame.

[Trim In]

Sets the current frame as the IN point of trimming.

[Trim Out]

Sets the current frame as the OUT point of trimming.

[Trim CLR]

Releases the trimming settings.

[<Step]

Moves one frame back from the current frame.

[>Step]

Moves one frame forward from the current frame.

NOTE

When moving images are saved to a register memory, only the trimmed portion is saved.

The same position cannot be specified for the IN point and the OUT point. The minimum unit for trimming is two frames.

Layout of display icons

Current icons

Current icon of still image

Select the <MEM> button on the top menu

→

[STILL]

→

[Still] tab, then the following icon is displayed at the top of the page. The icon is used for

channel selection.

1 Channel name

Displays channels from [Still1] to [Still4].

Source with key mark

Indicates a source with key. This mark is displayed only for sources with key.

Current icon of moving image

Select the <MEM> button on the top menu

→

[CLIP]

→

[Play Clip1] to [Play Clip4]/[Rec] tabs, then the following icon is displayed at the top of the page.

This icon is used for playback status display and channel selection.

Содержание AV-HS6000














































































































































































Результаты поиска

Содержание AV-HS6000

Отзывы:

Похожие инструкции для AV-HS6000

Бренды по названию

Популярные бренды

Panasonic AV-HS6000, Руководство по эксплуатации

Результаты поиска

Содержание AV-HS6000

Отзывы:

Похожие инструкции для AV-HS6000

Бренды по названию

Популярные бренды