Panasonic AV-HS6000, Руководство по эксплуатации

Страница: 91 / 173

– 91 –
Chapter 5 Basic Operations — Video memory
Video memory
The unit can store and use the still image memory (Still) and the moving image memory (Clip), each in four channels. The menu screen and the
thumbnail display of the multi-selection menu panel will be available in V2.00.00 or higher.
f
Images with key signals can be saved in the video memory (still images and moving images).
f
With the standard image quality, images of up to 1200 frames (approx. 40 seconds in the 1080/59.94i format) can be saved in the moving image
memory per channel. With the high image quality, images up to 600 frames (approx. 20 seconds in the 1080/59.94i format) can be saved in the
moving image memory per channel.
f
The number of seconds which can be saved in the moving image memory varies depending on the system format (frame rate).
f
Data in the video memory is deleted when the power is turned off.
f
Data in the video memory can be saved and loaded on/from the Storage ModuleAV-HS60D1 (optional) which can be mounted on the Main Frame
AV-HS60U1/AV-HS60U2, memory card, and computer connected to the <LAN> terminal. (Connecting with a computer will be available in V2.00.00 or
higher.)
Main Frame
<PANEL> terminal
<LAN> terminal
Still 1V
Still 1K
Still 2V
Still 2K
Still 3V
Still 3K
Still 4V
Still 4K
Clip 1V
Clip 1K
Clip 2V
Clip 2K
Clip 3V
Clip 3K
Clip 4V
Clip 4K
From XPT
VMEM F
VMEM S
To XPT
STILL V/K 1 to 4
1 frame
(volatile memory)
CLIP V/K 1 to 4
High image quality: Approx. 20 sec
Standard image quality: Approx. 40 sec
(volatile memory)
Storage Module (SSD)
Still Register: Max. 48
Clip Register: Max. 48
(non-volatile memory)
Control Panel
Local computer
Memory card
Storage
Recording still images (Still)
Input images selected on the VMEM F/S buses can be recorded.
f
Image data created using a computer can be loaded.
For details, refer to “Operating the register memory” (page 93).
f
This operation can be also performed in the multi-selection panel area.
For details, refer to “Video memory menu” (page 39).
1
Select the <MEM> button → [STILL] → [Still] tab.
2
Select [Still1] to [Still4] in [Current Still], and select [Rec] in the [Rec1] column.
f
When [Rec] is selected in the [Rec1] column, the source selected on the VMEM bus is recorded as still images for the selected channel.
When the recording of the still images is completed, thumbnails of the still images are displayed on the thumbnail screen.
Various settings when recording still images (Still)
1
Select the <MEM> button → [STILL] → [Still] tab.
2
Select an item in [Register Store] in the [Rec1] column.
f
This function will be available in V2.00.00 or higher.
f
Specify the method to register a register memory when captured.
[Manual] Select [Store] in the [Register] tab to register the frame memory of the relevant channel.
[Auto]
Registers the frame memory of the relevant channel in the free area in the register memory when [Rec] is selected.
Continuous saving is possible by selecting [Rec] continuously.