Panasonic AV-HS6000, Руководство по эксплуатации

Страница: 90 / 173

– 90 –
Chapter 5 Basic Operations — Memory
@ @
NOTE
t
The <MCRO ATCH> button in the transition area on the Control Panel AV-HS60C1/AV-HS60C2 switches enabled/disabled status of the macro attach
function assigned to the relevant buttons in the ME.
- When it is turned on, the macro attach function is enabled.
- The button to which the macro attach function is applied blinks while holding down the button.
Key preset
It is a preset memory to store various settings for keys.
Operate this memory in the KEY/DSK operation area on the Control Panel AV-HS60C1/AV-HS60C2, or operate using the <MEM> button.
@ @
NOTE
t
This function will be available in V2.00.00 or higher.
Operating in the KEY/DSK operation area on the Control Panel AV‑HS60C1/AV‑HS60C2
Recall/register key preset memories using the KEY/DSK preset memory (<1>/<2>/<3>/<4>) buttons.
r
Button operation
Short press: Recalls the data saved on the relevant button. (Recall)
Long press: Registers the current key setting in the relevant button. (Store)
r
Button display
Low tally: The button recalled last time or registered last time
Preset tally: Buttons on which memory is saved
Off: Buttons on which no memory is saved
Operating on the Menu Panel AV‑HS60C3
Details of the playback target (XPT, Effect, Trans) can be selected.
1
Select the <MEM> button → [KEY PRESET] →
[Register] tab.
2
Use [ME1] to [ME2]/[DSK] in the [Select1] column, and [Key1] to [Key4] in the [Select2] column to select any key.
3
Use [PMEM1] to [PMEM4] in the [Preset] column to select any preset memory.
4
Select an item in the [Function] column.
f
Those functions are performed for the preset memory selected in the [Select1]/[Select2]/[Preset] columns.
[Recall] Plays back the target.
[Store]
Registers the target (by overwrite).
[Delete] Deletes the target.
5
Select an item in the [Recall Select] column.
f
Select the playback target. (This setting is common to all keys.)
[XPT] When set this item to [On], plays back key fill, key source, and source preset.
[Key Effect]
When set this item to [On], plays back the key decoration setting (content excluding the source preset (key type, key
parameter, mask settings) from the [KeySetting], [PinPAdjust], [FlyingKey], and [Chroma] tabs).
[Key Trans] When set this item to [On], plays back the key transition setting (setting in the [Transition] and [KeyPattern] menus).