Panasonic AV-HS6000 Скачать руководство пользователя страница 148

Страница: 148 / 173

– 148 –

Chapter 9 External Interfaces — Plug‑in software

Plug‑in software

The unit allows plug-in software to be registered and functions to be added.

Plug-in software can be registered, deleted, or started through the <PLUG IN> button on the top menu

→

[PLUGIN]

→

[List].

For detailed information regarding the plug-in software, consult your dealer.

NOTE

This function will be available in V2.00.00 or higher.

Select the <PLUG IN> button

→

[PLUGIN]

→

[List] tab.

Select an item in [Enable on boot] in the column which displays the name of the plug‑in to be set.

Set whether to start the plug-in software when the unit is started up.

The [Enable on boot] setting takes effect the next time the unit is started up.

[On]

The plug-in software is started up when the unit is started up.

[Off]

The plug-in software is not started up when the unit is started up.

Select an item in the column which displays the name of the plug‑in to be set.

[Version]

Displays the plug-in software version.

[Delete]

Deletes the plug-in software from the internal memory.

The corresponding plug-in software is deleted the next time the unit is started up.

[SD Load]

Loads the program from the memory card.

[Local Load]

Loads the plug-in software saved in the computer.

By registering the plug‑in software, individual menu operation defined using the plug‑in software becomes available.

This function is available only in computers connected to the <LAN> terminal.

Содержание AV-HS6000














































































































































































Результаты поиска

Содержание AV-HS6000

Отзывы:

Panasonic AV-HS6000, Руководство по эксплуатации, Страница: 148 / 173

Результаты поиска

Содержание AV-HS6000

Отзывы: