– 160 –
Chapter 7 Menu Operations — Menu list
Item
Description of settings
[SAFETY AREA]
Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]…[100%]
f
Factory setting: [90%]
[FRAME MARK]
Selects frame marker [ON]/[OFF].
[ON], [OFF]
f
Factory setting: [OFF]
[FRAME SIG]
Sets frame marker aspect ratio.
The [VISTA] is 16:8.65 (1.85:1), and [CNSCO] is 16:6.81 (2.35:1).
[4:3], [13:9], [14:9], [VISTA], [CNSCO]
f
Factory setting: [4:3]
[FRAME LVL]
Sets the level of the outside of the frame marker.
[0]:
Equivalent to signal off (blanking status).
[1]…[14]:
Higher numbers indicate increased brightness.
[15]:
Same brightness as center.
f
Factory setting: [15]
[VF USER BOX]
The user box can be displayed as a box-type cursor in any position.
Item
Description of settings
[USER BOX]
Sets whether to display the user box in the viewfinder.
[ON], [OFF]
f
Factory setting: [OFF]
[USER BOX WIDTH]
Sets the width of the user box.
[1]…[100]
f
Factory setting: [13]
[USER BOX HEIGHT]
Sets the height of the user box.
[1]…[100]
f
Factory setting: [13]
[USER BOX H POS]
Sets the horizontal position of the center of the user box.
[
−
50]…[50]
f
Factory setting: [0]
[USER BOX V POS]
Sets the vertical position of the center of the user box.
[
−
50]…[50]
f
Factory setting: [0]
[VF INDICATOR]
Item
Description of settings
[EXTENDER]
Turns extender display [ON]/[OFF].
[ON], [OFF]
f
Factory setting: [ON]
[SHUTTER]
Turns shutter speed display [ON]/[OFF].
[ON], [OFF]
f
Factory setting: [ON]
[FILTER]
Turns filter no. display [ON]/[OFF].
[ON], [OFF]
f
Factory setting: [ON]
[WHITE]
Turns [AWB PRE]/[A]/[B] display [ON]/[OFF].
[ON], [OFF]
f
Factory setting: [ON]
[GAIN]
Turns the currently selected gain, [S.GAIN], and [DS.GAIN] displays [ON]/[OFF].
[ON], [OFF]
f
Factory setting: [ON]
[IRIS]
Selects displays of super iris and super black operation status, and iris value.
[IRIS]:
Displays only the iris value.
[S
+
IRIS]:
Displays all.
[S]:
Displays super iris and super black operation status.
[OFF]:
Does not display.
f
Factory setting: [S
+
IRIS]
Coordinates iris value display and iris override display. When iris override is changed, it is displayed for
three seconds even if [OFF] is set.
[CAMERA ID]
Sets whether to record camera ID.
[BAR]:
Records camera ID when color bar signals are recorded.
[OFF]:
Does not record.
f
Factory setting: [BAR]
[ID POSITION]
Sets the location to display camera ID.
[UPPER R]:
Upper right
[UPPER L]:
Upper left
[LOWER R]:
Lower right
[LOWER L]:
Lower left
f
Factory setting: [UPPER L]
This item cannot be set when [CAMERA ID] is set to [OFF].
Содержание AJ-PX5000G
Страница 9: ...Before using the camera read this chapter and check the accessories Chapter 1 Overview ...
Страница 219: ...This chapter describes how to use the camera by connecting to network Chapter 9 Network Connection ...
Страница 251: ...This chapter describes the dimensions specifications and connector signals Chapter 11 Specification ...