– 226 –
Chapter 9 Network Connection — Network settings
[DHCP]:
Setting whether to use automatic acquisition via DHCP (
[ENABLE]:
Use automatic acquisition/
[DISABLE]:
Does not use automatic
acquisition) (Factory setting: [ENABLE])
[IP ADDRESS]:
IP address (Factory setting: [192.168.0.1])
[SUBNET MASK]:
Subnet mask (Factory setting: [255.255.255.0])
[DEFAULT GATEWAY]:
Default gateway (Factory setting: [192.168.0.254])
[PRIMARY DNS]:
Primary DNS server setting (Factory setting: [0.0.0.0])
[SECONDARY DNS]:
Secondary DNS server setting (Factory setting: [0.0.0.0])
[DHCP SERVER]:
Setting whether to use the DHCP SERVER function (
[ENABLE]:
Uses the DHCP SERVER function/
[DISABLE]:
Does not use
the DHCP SERVER function) (Factory setting: [DISABLE])
2
Select [LAN] in the main menu
→
[I/F SETUP]
→
[USB/LAN]
→
[NETWORK SEL].
3
Configure the settings of wired LAN of your computer.
(For Windows)
Display [Properties] in [Internet Protocol Version 4 (TCP/IPv4)] and configure the settings. For details on how to display the screen, refer to [Start]
→
[Help and Support].
f
When [DHCP SERVER] is set to [ENABLE] on the camera
Select [Obtain an IP address automatically] and [Obtain DNS server address automatically] in the [General] tab. Select [Automatic private IP
address] in the [Alternate Configuration] tab.
f
When [DHCP SERVER] is set to [DISABLE] on the camera
Select [Use the following IP address] in the [General] tab.
- [IP address]: Enter the same address as that of the camera.
- [Subnet mask]: Enter the same value as that of the camera.
- [Default gateway]: Enter the same address as that of the camera.
- [Preferred DNS server]/[Alternate DNS server]: Not necessarily to be entered.
(For Mac OS)
f
When [DHCP SERVER] is set to [ENABLE] on the camera
[Configure IPv4]: Select [Using DHCP].
[Configure IPv6]: Select [Automatically].
f
When [DHCP SERVER] is set to [DISABLE] on the camera
[Configure IPv4]: Select [Manually] and enter the following items.
- [IP Address]
- [Subnet Mask]
- Entering [Router] is not required. Leave it blank.
[Configure IPv6]: Select [Automatically].
Содержание AJ-PX5000G
Страница 9: ...Before using the camera read this chapter and check the accessories Chapter 1 Overview ...
Страница 219: ...This chapter describes how to use the camera by connecting to network Chapter 9 Network Connection ...
Страница 251: ...This chapter describes the dimensions specifications and connector signals Chapter 11 Specification ...