Panasonic AJ-PX5000G, Руководство по эксплуатации

Страница: 213 / 260

– 213 –
Chapter 8 Connecting to External Devices — Connecting to the remote control unit (AJ-RC10G)
Connecting to the remote control unit (AJ-RC10G)
f
Connect the remote control unit AJ-RC10G (optional) to remote-control some functions.
f
When you connect AJ-RC10G and set the <POWER> switches of the camera and AJ-RC10G to <ON>, the camera automatically enters the remote
control mode.
f
Remove AJ-RC10G, or set the <POWER> switch on AJ-RC10G to <OFF> to release remote control mode.
<REMOTE> terminal AJ-RC10G
Switch functionality in remote control mode
The following switches and buttons on the camera do not function in remote control mode.
f
<SHUTTER> switch
f
<MENU> button
f
Jog dial button
f
<GAIN> selector switch
f
<OUTPUT>/<AUTO KNEE> selector switch
f
<WHITE BAL> switch
f
<USER MAIN> button
f
<USER 1> button
f
<USER 2> button
Recording and playback operations in remote control mode
Recording/playback operations can be performed both on the camera and AJ-RC10G when the remote control unit is connected.
Remote control unit connected to the camera
When AJ-RC10G is connected to the camera, the operations of the following functions differ from the descriptions in the Operating Instructions supplied
with AJ-RC10G.
r
<A.KNEE ON> button
By selecting [DRS] from the main menu → [CAMERA] → [SW MODE] → [AUTO KNEE SW] on the camera, you can switch [DRS] between [ON]/[OFF]
with this button. The button lights up when [DRS] is [ON], and the light goes off when it is [OFF].
r
<CHARA ON> button
Selects whether the characters are superimposed over the video signals output to the <VIDEO OUT>, <SDI OUT2>, and <HDMI OUT> terminals of the
camera.
When AJ-RC10G is connected, the <MON OUT CHARACTER> switch of the camera does not function.
r
Scene files
Scene files created on other models cannot be loaded. If you try to load such a file, [NG] is displayed on the LCD of AJ-RC10G.
r
Menu
[GAMMA]
f
The variable range of [GAMMA-MODE-SEL] is as follows.
[HD], [SD], [F-LIKE1], [F-LIKE2], [F-LIKE3], [FILM REC], [VIDEO REC]
f
[DYMC-LVL] and [BSR-LVL] are added in the fourth level.
The variable ranges are as follows:
[DYMC-LVL]: [200%] to [600%]
[BSR-LVL]: [00%] to [30%]
Note that you can change the values only when [FILM-REC] is selected for [GAMMA-MODE-SEL].
f
[V-KNSLP] and [V-KNPNT] are added in the fifth level.
The variable ranges are as follows:
[V-KNSLP]: [150%] to [500%]
[V-KNPNT]: [30%] to [107%]
Note that you can change the values only when [VIDEO REC] is selected for [GAMMA-MODE-SEL].
[WHITE]
f
The variable range of [COLR-TEMP-PRE], [TEMP-A], and [TEMP-B] is [< 2300K] to [> 15000K].
[KNEE]
f
[CHROMA LEVEL] is added in the fifth level. The variable range is [OFF]/[ − 99%] to [40%].
f
[HI-COLOR LVL] is added in the sixth level. The variable range is [1] to [32].
f
[DRS MODE] is added in the seventh level. The variable range is [MODE1]/[MODE2].
f
[DRS EFFECT DEPTH] is added in the eighth level. The variable range is [1]/[2]/[3].
[C-COR]
f
The following items in the camera’s main menu → [PAINT] → [COLOR CORRECTION] cannot be set from AJ-RC10G.
[R-R-Mg (SAT)], [R-R-Mg (PHASE)], [Yl-Yl-R (SAT)], [Yl-Yl-R (PHASE)], [Yl-R-R (SAT)], [Yl-R-R (PHASE)]