156
Maintenance and Inspections: Warning System
Card Warning Code
Code No.
Description
Recording
Indication in display
window
E-70
The directory structure on the P2 card is not
supported. ([DIR NG CARD (Slot No.)] is
indicated on the viewfinder.)
Operation continues. However, back up data
on the P2 card as soon as possible, and format
the card before using it again.
A warning code blinks once
every 2 seconds on the time
code display section of the
display window.
E-71
The maximum number of overwrites on the P2
card has been exceeded. ([RUN DOWN CARD
(Slot No.)] is indicated on the viewfinder.)
Operation continues. However, recording or
playback may not operate correctly. It is
recommended that you replace the P2 card
with another one.
Warning and Error Display for Thumbnail Operation and USB HOST MODE
Item
Message
Description
Measure
Thumbnails
CANNOT ACCESS!
Data cannot be accessed because it is
corrupted or for other reasons.
Restore media and clips to normal state before
access.
CANNOT CHANGE!
With the AVC-Intra100 or AVC-Intra50, clips
for which thumbnails cannot be created, and
for which the
mark is displayed cannot
have the thumbnail for their text memo
position changed.
Please set the SYSTEM MODE item to match the
clip.
The menu item SYSTEM MODE is found in the
<SYSTEM MODE> screen on the SYSTEM
SETTING page.
CANNOT COPY!
Images cannot be copied.
Check the conditions for copying.
CANNOT DELETE !
Contents version mismatch prevents deletion. Match devices and contents version.
CANNOT FORMAT!
P2 card problem prevents formatting.
Check P2 card.
CANNOT RE-
CONNECT!
A clip that does not span multiple cannot be
reconnected.
Check selected content.
CANNOT REPAIR!
Data cannot be repaired since content that
cannot be repaired is selected.
Check selected content.
LACK OF REC
CAPACITY!
There is not enough recording capacity left on
the card.
Insert a card with sufficient recording capacity.
MISSING CLIP!
A shot mark will be added to the clips recorded
on multiple P2 cards when all P2 cards are not
inserted yet.
Insert all P2 cards with recorded clips, and confirm
that the
incomplete clip indicators disappear, and
then add shot marks.
NO CARD!
No P2 or SD card is inserted.
Insert compatible media.
NO COPY TO SAME
CARD!
A clip cannot be copied to the card storing the
original clip.
Copy the selected clip to a card that does not
contain the original clip.
NO FILE!
The designated file is not found.
Check the file.
SAME CLIP IS
SELECTED!
Images cannot be copied since the clip has
already been copied from the original clip.
Confirm the selected clip and release either the
source clip or the destination clip and then execute
the copy operation.
TOO MANY CLIPS!
Too many clips are selected.
Reduce the number of selected clips.
UNKNOWN
CONTENTS
FORMAT!
Warning displayed to indicate contents version
mismatch.
Match devices and contents version.
UNKNOWN DATA!
The metadata character code is invalid.
Use UTF-8 for the metadata character code. Use
the viewer to enter correct characters.
USER CLIP NAME
MODIFIED!
Characters in the clip name had to be deleted
in adding the counter value.
The user clip name plus the counter value can only
contain up to 100 bytes. Characters in the clip name
are automatically deleted when the total exceeds
100 bytes.
WRITE
PROTECTED!
The P2 or SD card is write protected.
Insert write-enabled media.
Soft
keyboard
CANNOT CHANGE!
[PERSON] will be entered while the text
memo is not available.
Enter [TEXT] before entering [PERSON].
CANNOT SET!
INVALID VALUE!
The entered value is incorrect.
Change the value.
AJ-HPX3100G(VQT3A79)_E.book 156 ページ ２０１０年９月１７日 金曜日 午後９時２１分
