134
Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview
Notes
z
Deleting only the respective items of LOCATION
(recording location data) in SHOOT is not possible. By
setting ALTITUDE to empty, other LONGITUDE/
LATITUDE items are collectively deleted.
z
The metadata for a clip with the
incomplete clip
indicator cannot be modified. For the clips recorded on
multiple P2 cards, modify the metadata while all P2 cards
are inserted.
z
Any MEMO with 101 characters or more cannot be
modified.
_
P2 Card Status Display Settings
Select PROPERTY
>
CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU button and select
PROPERTY
>
PROPERTY SETUP
>
P2
CARD CAP from the thumbnail menu.
The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP menu
option.
REMAIN:
Show remaining free space on the P2 card as the P2
card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as the P2
card status display.
From the thumbnail menu, select PROPERTY
>
CARD
STATUS. The following screen appears.
When “REMAIN” is selected:
1.
Write-protect Mark
The
mark appears if the P2 card is write-protected.
2.
P2 Card Status (remaining free space)
The remaining memory capacity of the P2 card is
indicated by a bar graph and percentage. The bar graph
indicator moves to the left as the remaining free space
decreases.
The following indications may appear, depending on the
card status:
FORMAT ERROR:
An unformatted P2 card is inserted.
NOT SUPPORTED:
An unsupported card is inserted in the camera.
NO CARD:
P2 cards are not inserted.
Use the cursor button to place the cursor on the P2 card
for data you want to access and press the SET button to
display detailed information about the P2 card to check
individual information such as the serial number and the
user ID.
3.
P2 Card Remaining Capacity/Total Capacity
Displays the P2 card remaining capacity and total
capacity in minutes. The total of the remaining memory
capacity for each P2 card that is displayed may not
match the actual total remaining memory capacity for
the P2 cards because only the figure in minute is
displayed.
4.
Total remaining free space for the slot
Displays the total remaining free space for all 2 slots.
Please note that the remaining capacity of a write-
protected P2 card is not included in the total remaining
capacity.
5.
Warning symbol
When the following P2 card is detected, the symbol is
displayed.
RUN DOWN CARD:
The maximum number of overwrites on the P2 card
has been exceeded.
DIR ENTRY NG CARD:
The directory structure on the P2 card is not
supported.
The warning can be confirmed on the P2 card detailed
information indication in [2.P2 Card Status (remaining
free space)].
P2 Card Status Display
Contents of P2 Card Status Display Settings
1
2
4
3
5
AJ-HPX3100G(VQT3A79)_E.book 134 ページ ２０１０年９月１７日 金曜日 午後９時２１分
